Mini Motor AC Geared Motor, 3 Phase, 400 V ac, 560 RPM, 290 W

  • RS-stocknr. 181-7028
  • Fabrikantnummer XCF5T2-5-B5
  • Fabrikant Mini Motor
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IT
Productomschrijving

WORM GEARED MOTOR. White epoxy protective coated for use in harsh environments. Technicalities, MOTOR: Asynchronous three-phase motor with 2 poles. Protection IP67 in compliance with IEC/EN 60529 standards. GEAR UNIT: With die-cast aluminium casing. Wheel rim in special bronze 120/160 HB hardness. Worm gear in hardened steel with thread rotating on ball and roller bearings. Output shaft in stainless steel. Lubrication with special long-lasting oil. Sealing rings designed for high temperatures. Rated torque from 4.4 to 35 Nm.

For clean environments
Up to 35Nm rated torque
Minimal dirt trap points
Epoxy coated with no external fan

Specificaties
Kenmerk Waarde
Output Speed 560 RPM
Supply Voltage 400 V ac
Phase 3
Power Rating 290 W
Maximum Output Torque 4.4 nm
Gearhead Type Worm
Current Rating 1.56 A
Length 291mm
Width 96mm
Depth 151mm
Dimensions 291 x 96 x 151 mm
Gear Ratio 5:1
Number of Poles 2
Frequency Rating 50Hz
Series XCF
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04-11-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
1.055,47
(excl. BTW)
1.277,12
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.055,47
Related Products
EN: Inline Helical Geared Motor. 130 W three-phase ...
Description:
EN: Inline Helical Geared Motor. 130 W three-phase motorUSA: Inline Helical Geared Motor. Single-phase and three-phase motor 1/5.6 HPMOTOR: Three-phase 2-pole asynchronous motor, totally enclosed. Built-in thermal cutoff. Winding Class H. Protection IP67 in compliance with IEC/EN 60929 standards.GEAR UNIT: ...
Direction of rotation controlled by phase-shifting.Speed of rotation ...
Description:
Direction of rotation controlled by phase-shifting.Speed of rotation depends on supply frequency and load applied to the output shaft.Sintered bearings, lubricated for life.Facing the shaft, rotation is clockwise.Output shaft Ø 8 mm with flat end.
A higher power shaded pole motor available with ...
Description:
A higher power shaded pole motor available with or without a gearbox, suitable for many applications requiring a low cost unit, which is quiet running and has compact dimensions. Typical applications include test equipment, industrial process equipment. Class F insulation ...
Shaded pole ac motor gear unitSuitable for many ...
Description:
Shaded pole ac motor gear unitSuitable for many applications requiring a low speed, high torque and quiet running unitTypical applications include catering equipment, vending machines, feed screw and transport mechanismsMotor is rated for continuous operation with Class B insulation and ...