MM7150-AB0 Microchip, 9-Axis Accelerometer, Gyroscope, Magnetometer, I2C, 16-Pin Module

  • RS-stocknr. 178-5352
  • Fabrikantnummer MM7150-AB0
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MM7150 Motion Sensor Module

The Microchip MM7150 Motion Sensor Module is a fully integrated inertial measurement device suitable for a wide range of applications requiring motion and 3D positioning data. The module incorporates MEMS technology coupling an accelerometer, gyroscope and magnetometer with Microchip’s SSC7150 Motion Coprocessor to provide a complete 9-axis sensor fusion solution. The form factor is a compact, single sided, 17mm x 17mm PCB which is easy to solder; ideal for embedded applications.

The on-board SSC7150 Coprocessor simplifies the process of incorporating sensor fusion into products; included within the firmware are all the required algorithms to filter, compensate, calibrate and fuse the raw 9-axis data. With a simple I2C connection the host MCU can easily tap into the motion and position data.

Features

Embedded SSC7150 Motion Coprocessor
Integrated Bosch Accelerometer, Gyroscope and Magnetometer
Low Power – 13.25mA in Active Mode
Sensor Power Management
Host I2C Interface
Small, Single Sided PCB – 17mm x 17mm

Sensor Modules, Microchip

Specificaties
Kenmerk Waarde
Sensor Type Accelerometer, Gyroscope, Magnetometer
Number of Axis 9
Mounting Type Surface Mount
Interface Type I2C
Maximum Frequency Response 400kHz
Maximum Operating Supply Voltage 3.6 V
Minimum Operating Supply Voltage 2.3 V
Package Type Module
Pin Count 16
Maximum Operating Temperature +70 °C
Minimum Operating Temperature -40 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 07-04-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tray of 90)
24,779
(excl. BTW)
29,983
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
90 +
€ 24,779
€ 2.230,11
*prijsindicatie
Related Products
These 3-axis MEMs accelerometers from Analog Devices offer ...
Description:
These 3-axis MEMs accelerometers from Analog Devices offer low noise, low drift and low power consumption with outstanding long term stability. The ADXL356 devices have analogue outputs and are available with ±10g/20g or ±10g/40g measurement ranges; the ADXL357 has SPI/I2C ...
The ADXL344 is a versatile 3-axis, digital-output, low ...
Description:
The ADXL344 is a versatile 3-axis, digital-output, low g MEMS accelerometer. Selectable measurement range and bandwidth and configurable, built-in motion detection make it suitable for sensing acceleration in a wide variety of applications. Robustness to 10,000 g/of shock and a ...
iNEMO inertial modules from ST Microelectronic integrate complementary ...
Description:
iNEMO inertial modules from ST Microelectronic integrate complementary types of sensors offering a compact, robust, and easy-to-assemble solution compared to many other discrete MEMS products. The iNEMO System-in-packages (SiP) combine accelerometer, gyroscope and magnetometer in either a monolithic 6-axis or ...
MEMS accelerometers and iSensor MEMS accelerometer subsystems from ...
Description:
MEMS accelerometers and iSensor MEMS accelerometer subsystems from Analog Devices to accurately detect and measure acceleration, tilt, shock and vibration in performance-driven applications. Signal conditioning technology is integrated into every MEMS accelerometer, gyroscope, inertial measurement unit (IMU) from ...