MM7150-AB0 Microchip, 9-Axis Motion Sensor Module, I2C, 16-Pin Module

  • RS-stocknr. 871-1723
  • Fabrikantnummer MM7150-AB0
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MM7150 Motion Sensor Module

The Microchip MM7150 Motion Sensor Module is a fully integrated inertial measurement device suitable for a wide range of applications requiring motion and 3D positioning data. The module incorporates MEMS technology coupling an accelerometer, gyroscope and magnetometer with Microchip’s SSC7150 Motion Coprocessor to provide a complete 9-axis sensor fusion solution. The form factor is a compact, single sided, 17mm x 17mm PCB which is easy to solder; ideal for embedded applications.

The on-board SSC7150 Coprocessor simplifies the process of incorporating sensor fusion into products; included within the firmware are all the required algorithms to filter, compensate, calibrate and fuse the raw 9-axis data. With a simple I2C connection the host MCU can easily tap into the motion and position data.

Features

Embedded SSC7150 Motion Coprocessor
Integrated Bosch Accelerometer, Gyroscope and Magnetometer
Low Power – 13.25mA in Active Mode
Sensor Power Management
Host I2C Interface
Small, Single Sided PCB – 17mm x 17mm

Sensor Modules, Microchip

Specificaties
Kenmerk Waarde
Sensor Type Motion Sensor Module
Number of Axis 9
Mounting Type Surface Mount
Interface Type I2C
Maximum Frequency Response 400kHz
Maximum Operating Supply Voltage 3.6 V
Minimum Operating Supply Voltage 2.3 V
Package Type Module
Pin Count 16
Maximum Operating Temperature +70 °C
Minimum Operating Temperature -40 °C
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
20 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
24,94
(excl. BTW)
30,18
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 24,94
Related Products
These 3-axis MEMs accelerometers from Analog Devices offer ...
Description:
These 3-axis MEMs accelerometers from Analog Devices offer low noise, low drift and low power consumption with outstanding long term stability. The ADXL356 devices have analogue outputs and are available with ±10g/20g or ±10g/40g measurement ranges; the ADXL357 has SPI/I2C ...
ST’s MEMS accelerometers include analogue and digital sensors ...
Description:
ST’s MEMS accelerometers include analogue and digital sensors featuring up to ±400g acceleration full scale and from 1.71 to 3.6 V supply voltage. Advanced power-saving features include ultra-low-power mode, auto wake-up function and FIFO buffer that can be used to ...
The ADXL344 is a versatile 3-axis, digital-output, low ...
Description:
The ADXL344 is a versatile 3-axis, digital-output, low g MEMS accelerometer. Selectable measurement range and bandwidth and configurable, built-in motion detection make it suitable for sensing acceleration in a wide variety of applications. Robustness to 10,000 g/of shock and a ...
ST’s MEMS accelerometers include analogue and digital sensors ...
Description:
ST’s MEMS accelerometers include analogue and digital sensors featuring up to ±400g acceleration full scale and from 1.71 to 3.6 V supply voltage. Advanced power-saving features include ultra-low-power mode, auto wake-up function and FIFO buffer that can be used to ...