Mecalectro Magnetic Lock, 2940N

  • RS-stocknr. 236-9351
  • Fabrikantnummer 5.85.01
  • Fabrikant Mecalectro
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

Supporting electromagnets

These devices are designed for supporting or gripping ferromagnetic parts.
The maximum retaining force is obtained by contact with flat mild steel parts, with a surface area equal to or greater than the attraction surface, and with a sufficient thickness (equal to at least 1/8th of the diameter ofthe electromagnet).
Any gap, no matter how small, will noticeably reduce this maximum force.

//media.rs-online.com/t_line/LF236929-10.gif
Specificaties
Kenmerk Waarde
Holding Force 2940N
Supply Voltage 24V dc
Diameter 90mm
Length 40mm
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
222,02
(excl. BTW)
268,64
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 222,02
5 - 11
€ 215,24
12 +
€ 208,25
Related Products
Electrical current is required to turn the magnet ...
Description:
Electrical current is required to turn the magnet ON. Power is removed to turn the magnet OFF. Free leads, two-pole connector, Hirschman connectorThreaded hole/s in rear face of magnetBright nickel plated with machined face.
Low power consumption components designed to hold a ...
Description:
Low power consumption components designed to hold a device in a specific position and to free this device using a simple electrical signal.Operation:- holding: the metal object is held in place on contact with the electromagnet, which is fitted on ...
A range of energise-to-hold electro-magnetic door holders suitable ...
Description:
A range of energise-to-hold electro-magnetic door holders suitable for use in hospitals, hotels, schools etc., to form part of an integrated fire system. Supplied with an integral test/override button.
These RS electro-permanent magnets provide a holding force ...
Description:
These RS electro-permanent magnets provide a holding force when de-energised and release when pulsed.Typical applications include: machine mechanisms, door/guard locking and remote hold / release requirements.Optimum performance when used with RS armature plates (available separately): please see stock no 739-3211 ...