RS PRO Magnetic Lock, 250N

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Energise to Release

These RS electro-permanent magnets provide a holding force when de-energised and release when pulsed.
Typical applications include: machine mechanisms, door/guard locking and remote hold / release requirements.
Optimum performance when used with RS armature plates (available separately): please see stock no 739-3211 etc.

Energise to hold version available on example 739-3233
12 and 24 vdc versions have a 2 pole connector
12 and 24 vdc versions are IP20 rated
240 vac versions have a Din 43650 connector
240 vac versions are IP54 rated

Specificaties
Kenmerk Waarde
Holding Force 250N
Supply Voltage 24V dc
Diameter 35mm
Length 78mm
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
151,57
(excl. BTW)
183,40
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 151,57
Related Products
Low power consumption components designed to hold a ...
Description:
Low power consumption components designed to hold a device in a specific position and to free this device using a simple electrical signal.Operation:- holding: the metal object is held in place on contact with the electromagnet, which is fitted on ...
These devices are designed for supporting or gripping ...
Description:
These devices are designed for supporting or gripping ferromagnetic parts.The maximum retaining force is obtained by contact with flat mild steel parts, with a surface area equal to or greater than the attraction surface, and with a sufficient thickness (equal ...
Power input: 24VdcVoltage tolerance: +/-15%Current draw: 60mA at ...
Description:
Power input: 24VdcVoltage tolerance: +/-15%Current draw: 60mA at 24Vdc (at temperature 20 °C)Holding force: Up to 100lbsDimensions: 85x85x35mm (Lock)Dimensions: 65x65x40mm (Armature plate)Over-ride switchBrushed stainless steel.
Power input: 12Vdc or 24VdcVoltage tolerance: +/-15%Current draw: ...
Description:
Power input: 12Vdc or 24VdcVoltage tolerance: +/-15%Current draw: 125mA at 12Vdc 60mA at 24Vdc (at temperature 20 °C)Holding force: Up to 100lbsOver-ride switchWall mountBlack powder-coat finish.