RS PRO Magnetic Lock, 1000N

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

RS PRO Energise to Hold Magnetic Locks

Designed for use with machine mechanisms or as door magnets, our high quality RS PRO range presents this small yet powerful magnetic lock. Able to remotely lock or un-lock with quick operation, these electro-permanent magnets are energised to hold and de-energised to release. Optimum performance when used with RS armature plates (available separately): please see stock no 739-3211 etc.

Energise to release version available on example 739-3220

12 and 24 vdc versions have a 2 pole connector
12 and 24 vdc versions are IP20 rated
240 vac versions have a Din 43650 connector
240 vac versions are IP54 rated

How to install a door magnet?

Generally the electromagnet is attached to the door frame, whilst an armature plate is attached to the door itself. Occasionally brackets may be needed to ensure the magnet is in the correct position for contact with the plate. To achieve the optimal pull force of 100%, a contact area must be achieved using the recommended armature plates.

Specificaties
Kenmerk Waarde
Holding Force 1000N
Supply Voltage 12V dc
Depth 30 mm
Diameter 50mm
18 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
62,82
(excl. BTW)
76,01
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 62,82
Related Products
Low power consumption components designed to hold a ...
Description:
Low power consumption components designed to hold a device in a specific position and to free this device using a simple electrical signal.Operation:- holding: the metal object is held in place on contact with the electromagnet, which is fitted on ...
A range of energise-to-hold electro-magnetic door holders suitable ...
Description:
A range of energise-to-hold electro-magnetic door holders suitable for use in hospitals, hotels, schools etc., to form part of an integrated fire system. Supplied with an integral test/override button.
These devices are designed for supporting or gripping ...
Description:
These devices are designed for supporting or gripping ferromagnetic parts.The maximum retaining force is obtained by contact with flat mild steel parts, with a surface area equal to or greater than the attraction surface, and with a sufficient thickness (equal ...
Power input: 24VdcVoltage tolerance: +/-15%Current draw: 60mA at ...
Description:
Power input: 24VdcVoltage tolerance: +/-15%Current draw: 60mA at 24Vdc (at temperature 20 °C)Holding force: Up to 100lbsDimensions: 85x85x35mm (Lock)Dimensions: 65x65x40mm (Armature plate)Over-ride switchBrushed stainless steel.