Texas Instruments SCANSTA111MT/NOPB, 7-Bit Addressable Scan Port, 3 → 3.6 V, 48-Pin TSSOP

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Addressable JTAG Port, Texas Instruments

The Texas Instruments SCANSTA111 extends the IEEE Std. 1149.1 test bus into a multi-drop test bus environment with the advantages of improved test throughput, and the ability to remove a board from the system whilst retaining test access to the remaining system modules. Each device supports up to three local IEEE 1149.1 scan rings which can be serially combined or accessed individually. A 32-bit TCK counter enables built-in self-test operations to be performed on one port while other scan chains are simultaneously tested.

The IEEE 1149.1 standard test access port and boundary-scan architecture uses devices known by the JTAG acronym, from Joint Test Action Group, and is used for testing and debugging system ports and PCB assemblies. Most embedded systems employ JTAG ports to enable in-circuit debugging and firmware programming, in addition to boundary scan testing.

Specificaties
Kenmerk Waarde
Number of Element Inputs 7
Number of Elements per Chip 1
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 48
Dimensions 12.6 x 6.2 x 1.05mm
Length 12.6mm
Width 6.2mm
Height 1.05mm
Maximum Operating Supply Voltage 3.6 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 3 V
Minimum Operating Temperature -40 °C
Operating Temperature Range -40 → +85 °C
Operating Supply Voltage Range 3 → 3.6 V
Prijs Each (In a Tube of 38)
9,016
(excl. BTW)
10,909
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
38 +
€ 9,016
€ 342,608
*prijsindicatie
Vanwege het beperkte aanbod kan RS op dit moment geen backorders accepteren.
Related Products
Texas Instruments range of Inverters and Buffers from ...
Description:
Texas Instruments range of Inverters and Buffers from the 74LVC Family of Low-voltage CMOS Logic ICs. The 74LVC Family use silicon gate CMOS technology and is designed to operate at 3.3V, allowing a significant reduction in power consumption when compared ...
The easy-to-use inductorless Charge Pump ICs from Texas ...
Description:
The easy-to-use inductorless Charge Pump ICs from Texas Instruments offer a small-sized, simpler solution with high performance. The charge pump or switched-capacitor converter is an alternative solution to inductive DC-DC converters and delivers higher efficiency than Low Dropout (LDO) regulators. ...
Texas Instruments range of Complex Function products from ...
Description:
Texas Instruments range of Complex Function products from the 74HC High Speed CMOS Logic Family includes Binary Adders, Magnitude & Identity Comparators, Parity Checkers, 7-segment LCD Latch/Decoder/Drivers and PLL (Phase Locked Loop) ICs. The 74HC Family use silicon gate CMOS ...
The MSP430 Platform is a range of mixed-signal, ...
Description:
The MSP430 Platform is a range of mixed-signal, ultra-low power microcontrollers from Texas Instruments. The 16-bit RISC architecture is perfectly suited for wireless, low-power industrial and portable applications. This established range has a strong and popular position due to its ...