Loctite 770 Liquid Bottle Adhesive Primer for use with Cyanoacrylate Adhesive, 10 g

  • RS-stocknr. 108-722
  • Fabrikantnummer 146624
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

Loctite® 770 Polyolefin Primer

Enhances adhesion of cyanoacrylates to materials normally very difficult to bond successfully
Promotes bonding of polypropylene, polyethylene, thermoplastic, rubber and silicone
Fluoresent additive allows checking of application with a UV lamp
Bonds PTFE etc to itself or other substrates

Loctite Adhesive Primer

The Loctite 770 liquid adhesive primer is a 10g, low viscosity for used with cyanoacrylate adhesive. It is only recommended for difficult to bond substrates which include polyethene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials. This polyolefin primer is not recommended in assemblies where high peel strength is required. This liquid behaves as an activator and accelerates the cure speed of cyanoacrylate adhesives. Fixturing time on most primed substrates is less than 5 seconds but 24 hours at room temperature (22 °C) should be allowed for adhesive to develop maximum bond strength.

Features and Benefits

• Chemical type aliphatic amine
• Solvent n-heptane
• Fluorescent additive allows checking of application with a UV lamp
• Specific gravity of 0.68

Certifications

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Trade Name Loctite 770
Type Primer
For Use With Cyanoacrylate Adhesive
Product Form Liquid
Package Type Bottle
Package Size 10 g
Specific Gravity 0.68
Viscosity Description Low Viscosity
Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each
18,11
(excl. BTW)
21,91
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 18,11
6 - 14
€ 17,39
15 +
€ 17,03
Related Products
The Loctite 7649 aerosol adhesive activator is a ...
Description:
The Loctite 7649 aerosol adhesive activator is a 150ml, low viscosity for used with gaskets, retaining, thread sealant and thread locker. This is designed to promote the curing speed of Loctite anaerobic adhesives and sealants without any significant loss of ...
Versatile durable two-part epoxy compounds for maintenance and ...
Description:
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals. Primer required for optimum bonding of all ...
The Loctite SF 7471 150ml aerosol adhesive activator ...
Description:
The Loctite SF 7471 150ml aerosol adhesive activator is used where an increased cure speed of Loctite anaerobic products is required. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps. This activator ...
Product used for mandatory preparation (stripping) on PVC ...
Description:
Product used for mandatory preparation (stripping) on PVC parts prior to assembly and before using special rigid PVC adhesive.Can also be used to clean brushes.