Loctite 7471 Aerosol Adhesive Activator for use with Gasketing, Retaining, Thread Sealant, 150 ml

  • RS-stocknr. 330-3970
  • Fabrikantnummer 231676
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Loctite® 7471 Activator for Anaerobic Adhesives

General purpose activator for anaerobic(threadlocking)adhesives
Promotes a faster cure
Will not reduce the strength of the adhesive
Water Research Council approved (hot and cold water)

Loctite Aerosol Adhesive Activator

The Loctite SF 7471 150ml aerosol adhesive activator is used where an increased cure speed of Loctite anaerobic products is required. It is especially recommended for applications with passive metals or inert surfaces and with large bond gaps. This activator is particularly recommended when the prevailing temperature is low (<15⁰C). It is made of Amine and Thiazole chemicals.

Features and Benefits

• Very low viscosity
• General-purpose activator for anaerobic (thread locking) adhesives
• Promotes a faster cure
• Will not reduce the strength of the adhesive
• Water Research Council approved (hot and cold water)

Applications

• Gasketing
• Retaining
• Thread sealing

Threadlocking and Retainers

Specificaties
Kenmerk Waarde
Trade Name Loctite 7471
Type Activator
For Use With Gasketing, Retaining, Thread Sealant
Product Form Aerosol
Setting Time 60s
Package Size 150 ml
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
11,47
(excl. BTW)
13,88
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 11,47
6 - 14
€ 11,01
15 +
€ 10,78
Related Products
The Loctite 7649 aerosol adhesive activator is a ...
Description:
The Loctite 7649 aerosol adhesive activator is a 150ml, low viscosity for used with gaskets, retaining, thread sealant and thread locker. This is designed to promote the curing speed of Loctite anaerobic adhesives and sealants without any significant loss of ...
The Loctite 770 liquid adhesive primer is a ...
Description:
The Loctite 770 liquid adhesive primer is a 10g, low viscosity for used with cyanoacrylate adhesive. It is only recommended for difficult to bond substrates which include polyethene, polypropylene, polytetrafluoroethylene (PTFE) and thermoplastic rubber materials. This polyolefin primer is not ...
Versatile durable two-part epoxy compounds for maintenance and ...
Description:
Versatile durable two-part epoxy compounds for maintenance and repair of a broad range of equipment. Cured repairs can be drilled, tapped, machined or painted which has long-life protection against abrasion, corrosion and chemicals. Primer required for optimum bonding of all ...
The Loctite 7457 liquid adhesive activator is a ...
Description:
The Loctite 7457 liquid adhesive activator is a 150ml, low viscosity for use with cyanoacrylate adhesive. It can be either pre or post applied to the bond. If pre-applied, the presence of Loctite 7457 can be detected by fluorescence. Loctite ...