LCBSBM-7-01A2-RT, 11.1mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base

  • RS-stocknr. 721-4723
  • Fabrikantnummer LCBSBM-7-01A2-RT
  • Fabrikant Richco
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Miniature Adhesive Backed Supports

PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm

Specificaties
Kenmerk Waarde
Overall Height 19.8mm
Body Height 11.1mm
Support Base Dimensions 12.7 x 12.7mm
PCB Hole Diameter 3.18mm
PCB Thickness 1.57mm
Material Nylon
Support Base Length 12.7mm
Support Base Width 12.7mm
360 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
6360 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 40)
0,15
(excl. BTW)
0,18
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
40 - 360
€ 0,15
€ 6,00
400 - 760
€ 0,144
€ 5,76
800 - 1960
€ 0,14
€ 5,60
2000 +
€ 0,128
€ 5,12
*prijsindicatie
Related Products
FLCBS model: flexible spacers for printed circuit boards ...
Description:
FLCBS model: flexible spacers for printed circuit boards to facilitate access to the underside of the board for marking or maintenance.
FLCBS model: flexible spacers for printed circuit boards ...
Description:
FLCBS model: flexible spacers for printed circuit boards to facilitate access to the underside of the board for marking or maintenance.
Nylon PCB support pillars in various heights. This ...
Description:
Nylon PCB support pillars in various heights. This type snaps into place on both the chassis and the board and requires no fixing screws. Can be released by handMaterial: Nylon 66Colour: NaturalMinimal protrusion of support underneath PCB or chassisHole dia: ...
A range of Self-retaining nylon PCB support pillars ...
Description:
A range of Self-retaining nylon PCB support pillars in various heights. All models are highly reliable and excellent quality. Secured by bolt or self-tapping screwMaterial: Nylon 66 or PVCColour: Natural.