RS PRO Silver Conductive Paint Paint, 20 g Bottle

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Electrically Conductive Paint

This silver conductive paint is primarily used to repair PCB tracks or manually draw a simple circuit. The paint can be used in various ways including to paint-on an electrical screen, or to make electrical connections on non-solderable surfaces.

Product Features

● Touch-dry in around 10 min and usable within your circuit in 30 minutes.
● For full mechanical and electrical properties you should bake it once it is dry at between 121°C to 148°C for 5 mins to 10 mins.

Product Warnings

This paint is flammable.

How to repair a damaged PCB trace

● Identify the damaged area.
● Remove the damaged solder and PCB trace using a scalpel or sharp knife.
● Clean the affected area with a lint-free cloth and isopropyl alcohol.
● Shake bottle vigorously before beginning and replace bottle cap when not in use.
● Paint the new trace (for very fine trace lines, use electrical tape to mask off the area and remove once painted for a clean straight line).
● Leave for 30 minutes then bake for 5 to 10 minutes for maximum mechanical and electrical properties.

Note

Shake vigorously before using and replace cap when not in use.

Warning

  • Flammable
Specificaties
Kenmerk Waarde
Adhesive Type Conductive Adhesive
Product Form Liquid
Package Type Bottle
Package Size 20 g
Cure Time 30 min
Special Features Quick Drying
Chemical Composition N-Butyl Acetate, Silver, 2-Butoxyethyl Acetate, 2-Methoxy-1-Methylethyl Acetate
40 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
105,03
(excl. BTW)
127,09
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 105,03
6 - 14
€ 100,83
15 +
€ 98,74
Related Products
Resistance properties:-,Chemical - Excellent,Heat - Good,Water - Good,Impact ...
Description:
Resistance properties:-,Chemical - Excellent,Heat - Good,Water - Good,Impact - Excellent. Colour - Pale yellowVersatile, excellent for a wide range of plastics, composites and metalsExcellent resistance to petrol and oilsTolerant to less pre-treatmentRapid cureGap filling up to 4mm thickness.
The Loctite transparent tube silicone adhesive is a ...
Description:
The Loctite transparent tube silicone adhesive is a non-corrosive single part RTV silicone sealant. It is specifically designed for use on corrosion sensitive metallic surfaces and coating of electronic devices, especially for military, automotive, and industrial electronics. The non-slumping nature ...
The MG Chemicals Liquid Thermal Gap Filler is ...
Description:
The MG Chemicals Liquid Thermal Gap Filler is a two-component, flame retardant, thermally conductive silicone gap filler. It is a smooth, non-sagging paste that easily conforms to the complex shapes of any interface design. The cured product creates a thermal ...
The ITW Devcon 50ml acrylic adhesive is a ...
Description:
The ITW Devcon 50ml acrylic adhesive is a 2-part structural paste and dispensing system which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesive. It ensures accurate ratio mix, fast application with a predetermined flow rate ...