Schneider Electric U-Line Advanced Motor Starter, 24 V dc

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

Parallel Wiring Module

It is possible using parallel wiring to connect a TeSys U starter to a PLC I/O module to transfer status and command information
Fits directly into a Power Base module
It must be used with a 24Vdc control Unit e.g Stock No. 493-8987 (LUCB 1XBL)
Each Module has 4 channels, 2 outputs for starter forward and reverse running,3 inputs for knob position, fault indication and position of poles
Interconnection to the PLC I/O module is via a RJ45 connector, ready leads are available e.g. Stock No. 493-9233 (LU9R03)

Schneider Electric TeSys U

The TeSys U is a modular system for motor control; it enables the user to create a customised solution for their control requirements, from a series of standard modules. The plug-in modules allow the assembly and wiring before the selection of motor protection parameters and control voltages, they can be created or changed in seconds by changing the plug-in modules. A host of DOL starting applications can be catered for.

Faster design with fewer components needed
Quicker panel build with faster assembly time and fewer wires per starter
Space saving 45mm width up to 32A (even for reversing) allowing smaller panels
Flexible and upgradeable with plug-and-play function modules
Voltage and protection parameters can be determined after assembly and wiring
Broad band electronic control unit provides improved overload protection with fewer components
Expandable plug-and–play diagnostics
Total co-ordination for fast return to service after a short circuit fault

Tesys model U is easy to select:

First choose a Power Base- 12A or 32A, direct on line or reversing. The power base includes 2 auxiliary contacts.
Then choose the plug-in protection module by motor full load current and control voltage required.
Additional plug in functions can be selected and added at any time.
The plug-in bases can use any LU9 type blocks see stock no. 493-8779 for base option

Warning

  • Schneider are in the process of amending the colour of the TeSys range, from White to Black. This means that the stock you receive could be either of these colours. Please be assured that the colour change in no way affects the Fit, Form or Function of the product.
Specificaties
Kenmerk Waarde
Series U-Line
Component Type Control Module
Range TeSys
Control Voltage 24 V dc
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
34,51
(excl. BTW)
41,76
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 34,51
Related Products
Professional range of Schneider Electric ultra-compact motor starter ...
Description:
Professional range of Schneider Electric ultra-compact motor starter combinations from the LZ2H series. The starters offer the best in class features needed for protection, safety monitoring and control of motor and power applications. Manual, electrical or automatic reset, energy efficient ...
The 4 in 1 Phoenix Contact 3-phase hybrid ...
Description:
The 4 in 1 Phoenix Contact 3-phase hybrid motor starter with reversing function and current monitoring is designed for DIN rail mounting where you need adjustable overload shutdown and emergency stop function to safety integrity level 3 (SIL 3) and ...
Description:
This is one of the two basic units which is required everytime, together with a control unit. It is independent of the control voltage motor power and incorporates the breaking function. Breaking capacity of 50kA @400VacShort circuit protectionDisconnection/isolationTwo auxiliary contacts ...
The ATEX approved, ELR series of Contractron 4 ...
Description:
The ATEX approved, ELR series of Contractron 4 in 1 hybrid motor starters from Phoenix Contacts give you an alternative to the traditional mechanical contractor circuits.The highly functional, DIN Rail mounting, reversing starter can be used where a three-phase induction ...