Strip Heater, Flat Bracket, 1 kW, 230 V ac

  • RS-stocknr. 374-2319
  • Fabrikantnummer RA 4080 1000
  • Fabrikant Acim Jouanin
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

ACIM Jouanin Strip Heater

The ACIM Jouanin flat bracket 1kW strip heater is designed to heat air or gas by natural or forced convection. This blade resistor heater can be heated up to a peak temperature of 200°C.
Note:
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning:
For reasons of safety the heater block and/or heater sheath must be bonded to earth

Features and Benefits

Minimum recommended airspeed is 2.5m/s
Rectangular finned resistors on stainless steel shielded tube
The supply voltage is 230VAC

Specificaties
Kenmerk Waarde
Peak Temperature +200°C
Connection Type Flat Bracket
Power Rating 1 kW
Supply Voltage 230 V ac
Overall Length 325mm
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
31 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
57,43
(excl. BTW)
69,49
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 57,43
5 - 9
€ 55,71
10 +
€ 53,41
Related Products
Air heaters feature an open coil of high ...
Description:
Air heaters feature an open coil of high temperature resistance wire electrically isolated in a stainless steel sheath. Because the air being heated passes directly over the resistance wire, maximum heat transfer efficiency is achieved. Ar heaters are used for ...
RS Pro Nozzle heaters are designed with the ...
Description:
RS Pro Nozzle heaters are designed with the highest quality materials used for optimal performance. The heaters are most commonly used in the plastic industry but are also suitable to use in applications of up to 1000°F. • High temperature ...
The Acim Jouanin 250W cartridge heater has a ...
Description:
The Acim Jouanin 250W cartridge heater has a diameter of 10mm and length of 40mm. It provides localised heat to a restricted work area requiring close thermal control. The cartridge heater has low/moderate watt density elements consisting of helical wire ...
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. Heater cartridges very quickly raise the temperature of solid masses by conduction.Stainless steel body for applications up to ...