- RS-stocknr.:
- 133-9980
- Fabrikantnummer:
- STEVAL-MKI176V1
- Fabrikant:
- STMicroelectronics
14 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 14,14
(excl. BTW)
€ 17,11
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 14,14 |
- RS-stocknr.:
- 133-9980
- Fabrikantnummer:
- STEVAL-MKI176V1
- Fabrikant:
- STMicroelectronics
Wetgeving en compliance
Productomschrijving
LSM6DS3H iNEMO Inertial Module Adapter Board for DIP24 Socket, STMicroelectronics
The STEVAL-MKI176V1 is an adapter board designed to evaluate the LSM6DS3H, iNEMO inertial module featuring a 3D accelerometer and 3D gyroscope. The board can be plugged into a standard DIP24 socket, providing access to the complete LSM6DS3H pinout. It comes ready-to-use with the required decoupling capacitors on the VDD power supply line.
This adapter is supported by the STEVAL-MKI109V2 and STEVAL-MKI109V3 motherboard, where you can use the downloadable graphical user interface (Unico GUI).
This adapter is supported by the STEVAL-MKI109V2 and STEVAL-MKI109V3 motherboard, where you can use the downloadable graphical user interface (Unico GUI).
Current consumption: 0.85 mA in combo normal mode; 1.1 mA in combo high-performance mode
Always-on experience with low power consumption for both accelerometer and gyroscope
SPI or I²C interface with the main processor
Auxiliary SPI to support OIS applications
Electronic Image Stabilization (or EIS) / Optical Image Stabilization (OIS) support
Accelerometer output data rate up to 6.66 kHz
Gyroscope output data rate up to 3.33 kHz
Smart FIFO
±2 g / ±4 g / ±8 g / ±16 g full scale
±125 / ±245 / ±500 / ±1000 / ±2000 dps full scale
Analogue supply voltage 1.71 V to 3.6 V
Always-on experience with low power consumption for both accelerometer and gyroscope
SPI or I²C interface with the main processor
Auxiliary SPI to support OIS applications
Electronic Image Stabilization (or EIS) / Optical Image Stabilization (OIS) support
Accelerometer output data rate up to 6.66 kHz
Gyroscope output data rate up to 3.33 kHz
Smart FIFO
±2 g / ±4 g / ±8 g / ±16 g full scale
±125 / ±245 / ±500 / ±1000 / ±2000 dps full scale
Analogue supply voltage 1.71 V to 3.6 V
iNEMO-Inertial Modules, STMicroelectronics
The iNEMO System-in-Package (SiP) inertial modules combine 3D Accelerometer, 3D Gyroscope in a 6-axis, and 3D Magnetometer in a combined 9-axis degrees of freedom solution. These motion sensors offer a compact, robust and easy-to-assemble. The inertial modules bring a high level of accuracy required for the most demanding applications.
Specificaties
Kenmerk | Waarde |
---|---|
For Use With | DIP24 Socket |