Development Kit Pmod I2S2 Stereo Audio Input and Output for use with Cirrus CS5343 Audio A/D Converter, Cirrus CS5343

  • RS-stocknr. 184-0481
  • Fabrikantnummer 410-379
  • Fabrikant Digilent
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

The Digilent Pmod I2S2 features a Cirrus CS5343 Multi-Bit Audio A/D Converter and a Cirrus CS4344 Stereo D/A Converter, each connected to 3.5mm Audio Jacks. These circuits allow a system board to transmit and receive stereo audio signals via the I2S protocol. The Pmod I2S2 supports 24-bit resolution per channel at input sample rates up to 108KHz.

Stereo 24-bit A/D and D/A converters for I2S audio input and output
Standard 1/8“ (3.5mm) stereo audio jacks
Optional automatic serial clock generation for audio input
12-pin Pmod Port with two I2S interfaces
Follows the Digilent Pmod Interface Specification 1.2

Specificaties
Kenmerk Waarde
Featured Device CS4344, CS5343
Kit Name Pmod I2S2 Stereo Audio Input and Output
15 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
21,84
(excl. BTW)
26,43
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 21,84
Related Products
20W, stereo, high-performance digital amplifier. 2x20W Amp click ...
Description:
20W, stereo, high-performance digital amplifier. 2x20W Amp click carries the MAX9744 stereo class D audio power amplifier from Maxim Integrated. This click brings the Class AB sound performance with Class D efficiency. The perfect combination for your speakers. 2x20W Amp ...
The Korg Nutube OD-E1 electronic part kit of ...
Description:
The Korg Nutube OD-E1 electronic part kit of overdrive contains the components to be assembled on the main circuit board. This kit includes resistors, capacitors, diodes, inductor, IC socket, operational amplifier, J-FET, connectors, slide switch, trimmer potentiometer, voltage regulator, DC ...
The STEVAL-CCA037V1 demonstration board is designed to evaluate ...
Description:
The STEVAL-CCA037V1 demonstration board is designed to evaluate the TS4990IQT low power audio amplifier. The micro package DFN8 (dual flat non-leaded 8 pins) allows space saving and good thermal dissipation. The BTL gain is set at 2 V/V and can ...
The STEVAL-CCA042V1 demonstration board is designed for the ...
Description:
The STEVAL-CCA042V1 demonstration board is designed for the TDA7491HV high-power dual BTL class-D audio amplifier. Thanks to its high efficiency, the device assembled in the PSSO36 (slug-down) package is capable of dissipating heat without a heatsink.Jumpers on the board allow ...