Development Kit Amplifier for use with Home Theater Systems, Mini and Micro Audio Components, Various Audio

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Audio Amp 2 click is a highly efficient class D audio amplifier, using the TDA7491, a dual BTL class-D audio amplifier IC, capable of delivering up to 20W to 8Ω load. This amplifier IC features high-efficiency output stage drivers and clever design, allowing it to deliver a reasonably high power to the connected speakers, using only GND polygon on the PCB for heat dissipation. In the BTL topology, the output DC blocking capacitors are not required. This allows for simpler design and lower power losses, especially with no input signal. The TDA7491 amplifier IC is equipped with a set of protection features, that allow reliable operation.

20 W + 20 W continuous output power: RL =8 Ω, THD = 10% at VCC = 18 V
Wide-range single-supply operation (5 V - 18 V)
High efficiency (Ƞ = 90%)
Four selectable, fixed gain settings of
nominally 20 dB, 26 dB, 30 dB and 32 dB
Differential inputs minimize common mode noise
No ’pop’ at turn-on/off
Standby and mute features
Short-circuit protection
Thermal overload protection
Externally synchronizable

Specificaties
Kenmerk Waarde
Analogue Function Audio Amplifier
Featured Device TDA7491
Kit Name Audio Amp 2 Click Board
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
20,60
(excl. BTW)
24,93
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 20,60
Related Products
The Korg Nutube HA-E1 electronic part kit of ...
Description:
The Korg Nutube HA-E1 electronic part kit of headphone amplifier contains the components to be assembled on the main circuit board. This kit includes slide switch, trimmer potentiometers, volume control, resistors, capacitors, IC socket, operational amplifiers (NJM4580 and MUSES01), battery ...
The Korg Nutube OD-E1 electronic part kit of ...
Description:
The Korg Nutube OD-E1 electronic part kit of overdrive contains the components to be assembled on the main circuit board. This kit includes resistors, capacitors, diodes, inductor, IC socket, operational amplifier, J-FET, connectors, slide switch, trimmer potentiometer, voltage regulator, DC ...
The Analog Devices analogue parts kit for analogue ...
Description:
The Analog Devices analogue parts kit for analogue development contains a large selection of components perfect for creating a wide variety of useful analogue circuits and devices. This kit includes transistors, LEDs, resistors, potentiometers, capacitors, diodes, inductors, sensors and a ...
The BeagelBone PRU Cape is an add-on board ...
Description:
The BeagelBone PRU Cape is an add-on board that allows users to evaluate the Programmable Real-Time Units (PRU) of the BeagleBone's processor. The PRU is a low-latency microcontroller sub-system integrated in the Texas Instruments' Sitara AM335x and AM437x family of ...