AD8233ACBZ-R7, Analogue Front End IC 14 bit, 20-Pin WLCSP

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

AD823x Heart Rate Monitor Front End

The AD823x devices are integrated signal conditioning blocks for ECG and other biopotential measurement applications. They are designed to extract, amplify and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode placement.

• Fully integrated, single-lead electrocardiogram (ECG) front-end
• Common-mode rejection ratio: 80dB (dc to 60Hz)
• 2- or 3-electrode configurations
• High signal gain (G = 100) with dc blocking capabilities
• 2-pole adjustable high-pass filter
• Accepts up to ±300mV of half cell potential
• Fast restore feature improves filter settling
• AC/DC leads on/off detection
• Right leg drive (RLD) amplifier
• Integrated reference buffer generates virtual ground
• Uncommitted op amp for optional 3-pole adjustable low-pass filter
• Rail-to-Rail output
• Internal RFI filter
• Shutdown pin
• 8kV human body model (HBM) ESD rating
• Power supply: +2.0V to +3.5Vdc (AD8232), +1.7V to +3.5Vdc (AD8233)
• Quiescent supply current: 170μA (AD8232), 50μA (AD8233)

RS Product Codes

786-3145 AD8232ACPZ-WP Heart Rate Monitor AFE
130-1032 AD8233ACBZ-R7 Heart Rate Monitor AFE for Wearable Products

Analogue Front End (AFE), Analog Devices

Specificaties
Kenmerk Waarde
Number of ADCs 1
Resolution 14 bit
Mounting Type Surface Mount
Package Type WLCSP
Pin Count 20
Power Supply Type Single
Dimensions 2.08 x 1.74 x 0.33mm
Height 0.33mm
Length 2.08mm
Maximum Operating Supply Voltage 3.5 V
Width 1.74mm
Minimum Operating Supply Voltage 1.7 V
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
2130 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 2)
3,95
(excl. BTW)
4,78
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 8
€ 3,95
€ 7,90
10 - 18
€ 3,575
€ 7,15
20 - 48
€ 3,205
€ 6,41
50 - 98
€ 2,995
€ 5,99
100 +
€ 2,775
€ 5,55
*prijsindicatie
Verpakkingsopties
Related Products
The Texas Instruments AFE4403 analogue front-end (AFE) is ...
Description:
The Texas Instruments AFE4403 analogue front-end (AFE) is designed specifically for heart rate monitoring and pulse oximetering. It is composed of a low noise receiver channel, ADC, oscillator and dual LED driver with integrated fault detection. Connect an external microcontroller ...
The 74HC540D/74HC541D are high speed CMOS OCTAL BUS ...
Description:
The 74HC540D/74HC541D are high speed CMOS OCTAL BUS BUFFERs fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. The 74HC540D is an inverting type, and the ...
The 74HC240D and 74HC244D are high speed CMOS ...
Description:
The 74HC240D and 74HC244D are high speed CMOS OCTAL BUS BUFFERs fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. The 74HC240D is an inverting 3-state ...
The MCP444x/446x series of devices from Microchip are ...
Description:
The MCP444x/446x series of devices from Microchip are Digital Potentiometers with non-volatile memory that are programmed via an I2C interface. These Digital POTs include Microchip’s WiperLock™ Technology which allows the wiper setting to be locked in place, protecting the wiper ...