Chauvin Arnoux C.A 5001 Analogue Multimeter 5A ac/dc 1000V ac/dc, With UKAS Calibration

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

C.A 5000 Series Analogue Multimeters

Range of analogue multimeters for safe measurement of direct or alternating currents.
Shockproof case with a "Multistand" multi-purpose fold-away stand for use at worksites as well as in the lab.
Analogue display with anti-parallax mirror for voltage scales.
The C.A 5005 multimeter is supplied with an MN89 mini-clamp and "Voltest" function to test for voltage on resistance and continuity tests.
Two versions, available in a carry cases with steel hinges for safe storage, protection and transport.
AA alkaline batteries (stock no.: 591-225) also available separately from the catalogue.

Class:
IEC 61010-1, category III / 600 V (C.A 5001);
IEC 61010-1, category III / 1000 V (C.A 5005)

Specificaties
Kenmerk Waarde
Safety Category CAT III 600 V
Calibrated UKAS
Maximum Current Measurement 5A ac/dc
Best AC Current Accuracy ±2.5 %
Best DC Current Accuracy ±2.5 %
Maximum Voltage Measurement 1000V ac/dc
Best AC Voltage Accuracy ±2.5 %
Best DC Voltage Accuracy ±1.5 %
Maximum Resistance Measurement 1 MΩ
Best Resistance Measurement Accuracy ±10 %
Battery Type AA
Model Number p C.A 5001
Maximum Operating Temperature +55°C
Dimensions 160 x 105 x 56mm
Safety Category Voltage 600V
Width 105mm
Battery Life 10000 15-Second Tests
Length 160mm
Minimum Operating Temperature -10°C
Safety Category Level CAT III
Height 56mm
Weight 500g
4 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
273,00
(excl. BTW)
330,33
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 273,00
Related Products
The MX1 and MX2B are genuinely double-insulated up ...
Description:
The MX1 and MX2B are genuinely double-insulated up to 1500 V in line with safety standards (case insulation voltage above 8 kV). SECUR'X locking prevents the test leads from being disconnected accidentally. If the leads remain connected, it is impossible ...
The Fluke 345 measures a wide range of ...
Description:
The Fluke 345 measures a wide range of electrical parameters for troubleshooting power disturbances in single- and three phase electrical loads. With a bright colour display to see waveforms and trends, a low-pass filter to remove high frequency noise, and ...
RS PRO IDM505 digital multimeter is designed for ...
Description:
RS PRO IDM505 digital multimeter is designed for harsh environments. With a watertight gasket at the seams rotary switch, input terminal and battery cover to keep out dust, dirt and splashing. These handheld devices can measure capacitance, voltage, electrical current, ...
The two-channel 2182A is optimised for making stable, ...
Description:
The two-channel 2182A is optimised for making stable, low noise voltage measurements and for characterising low-resistance materials reliably and repeatedly. It provides higher measurement speed and better noise performance than alternative low voltage measurement solutions. The ability to select from ...