AD534JHZ Analog Devices, 4-quadrant Voltage Multiplier, 1 MHz, 10-Pin TO-100

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Analogue Multipliers, Analog Devices

A range of analogue multipliers and dividers from Analog Devices suitable for a variety of signal processing applications. Both two and four quadrant types are available, in through-hole and SMT page options. Typical applications for these devices include differential ratio and percentage computations, algebraic and trigonometric function synthesis, accurate voltage controlled oscillators and filters, modulators and demodulators, gain control and rms-to-dc conversion.

Specificaties
Kenmerk Waarde
Number of Quadrants 4
Output Type Single Ended
Number of Elements per Chip 1
Maximum Operating Frequency 1 MHz
Maximum Dual Supply Voltage ±18V
Minimum Dual Supply Voltage ±8V
Mounting Type Through Hole
Package Type TO-100
Pin Count 10
Minimum Operating Temperature 0 °C
Height 4.7mm
Maximum Operating Temperature +70 °C
Length 9.4mm
Dimensions 9.4 x 9.4 x 4.7mm
Width 9.4mm
32 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
37,97
(excl. BTW)
45,94
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 37,97
5 - 19
€ 36,87
20 - 49
€ 35,70
50 - 99
€ 34,46
100 +
€ 33,59
Related Products
The Analog Devices through-hole mount 4-quadrant analogue multiplier ...
Description:
The Analog Devices through-hole mount 4-quadrant analogue multiplier and the divider is offered in low-cost 8-lead PDIP packages. The monolithic construction and laser calibration make this device stable and reliable and high input resistances make signal source loading negligible. The ...
A range of analogue multipliers and dividers from ...
Description:
A range of analogue multipliers and dividers from Analog Devices suitable for a variety of signal processing applications. Both two and four quadrant types are available, in through-hole and SMT page options. Typical applications for these devices include differential ratio ...
The Instrumentation Amplifier ICs amplify the difference between ...
Description:
The Instrumentation Amplifier ICs amplify the difference between two input signal voltages, while rejecting any signals that are common to both inputs. The DC precision and gain accuracy is maintained within a noisy environment, and also where large common-mode signals ...
A range of low input bias current and ...
Description:
A range of low input bias current and monolithic “electrometer” operational amplifiers from Analog Devices. These op amps feature high input impedance and ultra-low input bias currents and are suitable for applications such as electrometer amplifiers, photodiode preamplifiers, pH electrode ...