STG719STR STMicroelectronics, 1-quadrant Voltage Multiplier, 10 MHz, 6-Pin SOT-23

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

The STG719 is a high-speed SPDT (single pole double throw) switch fabricated in silicon gate C2MOS technology. It is designed to operate from 1.8 V to 5.5 V, making this device ideal for portable applications, audio signal routing, video switching, mobile, and communication systems. It offers 4 Ω ON-resistance max at 5 V, 25 °C and very low ON-resistance flatness. Additional key features include a fast switching speed (tON = 7 ns and tOFF = 4.5 ns), break before make delay time, and low power consumption. All inputs and outputs are equipped with protection circuits against static discharge, giving them ESD immunity and transient excess voltage. It is available in the commercial and extended temperature range.

High speed:
tPD = 0.3 ns (typ.) at VCC = 5 V
tPD = 0.4 ns (typ.) at VCC = 3.3 V
Low power dissipation:
ICC = 1 μA (max.) at TA = 25 °C
Low "ON" resistance:
RON = 4 Ω (max. TA = 25 °C) at VCC = 5 V
RON = 6 Ω (typ.) at VCC = 3 V
Wide operating voltage range:
VCC (opr) = 1.8 V to 5.5 V single supply

Specificaties
Kenmerk Waarde
Number of Quadrants 1
Output Type Single Ended
Number of Elements per Chip 1
Maximum Operating Frequency 10 MHz
Mounting Type Surface Mount
Package Type SOT-23
Pin Count 6
Width 1.75mm
Height 1.3mm
Dimensions 3 x 1.75 x 1.3mm
Minimum Operating Temperature -55 °C
Maximum Operating Temperature +125 °C
Length 3mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 03-09-2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 3000)
0,163
(excl. BTW)
0,197
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3000 - 6000
€ 0,163
€ 489,00
9000 - 21000
€ 0,159
€ 477,00
24000 +
€ 0,155
€ 465,00
*prijsindicatie
Related Products
These comparators are optimized for low power, single-supply ...
Description:
These comparators are optimized for low power, single-supply operation with greater than rail-to-rail input operation. The push-pull output of the MCP6561/2/4 family supports rail-to-rail output swing, and interfaces with TTL/CMOS logic. The output limits supply current surges, and dynamic power ...
Instrumentation Amplifier is a type of differential amplifier ...
Description:
Instrumentation Amplifier is a type of differential amplifier that has been outfitted with input buffer amplifiers, which eliminate the need for input impedance matching. Characteristics include very low DC offset, low drift, low noise, very high open-loop gain, very high ...
Instrumentation Amplifier is a type of differential amplifier ...
Description:
Instrumentation Amplifier is a type of differential amplifier that has been outfitted with input buffer amplifiers, which eliminate the need for input impedance matching. Characteristics include very low DC offset, low drift, low noise, very high open-loop gain, very high ...
The range of isolation amplifier optocouplers from Avago ...
Description:
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide ...