- RS-stocknr.:
- 192-6417
- Fabrikantnummer:
- 18-013-013
- Fabrikant:
- Norgren
199 op voorraad - levertijd is 3 à 5 werkdagen . Gekalibreerde producten kunnen niet worden geretourneerd.
Toegevoegd
Prijs Per stuk
€ 93,51
(excl. BTW)
€ 113,15
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 93,51 |
- RS-stocknr.:
- 192-6417
- Fabrikantnummer:
- 18-013-013
- Fabrikant:
- Norgren
Datasheets
Wetgeving en compliance
Productomschrijving
IMI Norgren Pressure Gauge, Plastic Face, 50mm Outer Diameter - 18-013 Series - 18-013-013
Take the stress out of monitoring your compressed air output with this pressure gauge from IMI Norgren. Its analogue display lets you quickly see when the air supply dials up or drops down, making the device simple to read and interpret. For ease of use, you can pop it anywhere in your circuit where there's a need to keep a close eye on the pressure. An accuracy of 2.5% gives you precise readings, which helps to minimise the chance of equipment damage caused by compressed air spikes. The robust steel body means you can count on an extended service life even in harsh operating conditions.
Features & Benefits
• Light weight of 51g puts minimal strain on your setup
• Corrosion-resistant plastic face, making it compatible with humid settings
• Wide operating pressure range between 0 and 10 bar that meets the needs of demanding systems
• Corrosion-resistant plastic face, making it compatible with humid settings
• Wide operating pressure range between 0 and 10 bar that meets the needs of demanding systems
Applications
• Automotive manufacturing
• Food and beverage processing
• Lubricating systems
• Pharmaceutical industry
• Food and beverage processing
• Lubricating systems
• Pharmaceutical industry
Which media can I use with this pressure gauge?
You can use this pressure gauge with compressed air, oil, and gases or liquids that don't corrode copper alloys.
Specificaties
Kenmerk | Waarde |
---|---|
Maximum Pressure Measurement | 10bar |
Minimum Pressure Measurement | 0bar |
Mounting Type | Back Entry |
Display Type | Analogue |
Connection Size | R 1/8 |
Gauge Outside Diameter | 50mm |
Best Accuracy | ± 2.5% |
Series | 18-013 |
Case Material | ABS, Stainless Steel, Steel |
Minimum Operating Temperature | -40°C |
Calibrated | RSCAL |
Maximum Operating Temperature | +65°C |
Pressure Range | 0 → 10bar |