Sifam Tinsley Frequency Meter, 45mm x 45mm

  • RS-stocknr. 886-2051
  • Fabrikantnummer ZQ44-46243N1CAW0ST
  • Fabrikant Sifam Tinsley
Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: IN
Productomschrijving

Sifam Sigma Series FM Frequency Meter

The pointer type frequency meters housed in moulded polycarbonate cases are suitable for the measurement of frequencies in the range of 45-65 Hz.
For maximum accuracy, the essential measuring range is obtained by supressing the unwanted frequency span. These Frequency Power Meters offer several advantages in switchboard and Generating Set Panels.

Linear scale
Glass filled polycarbonate housing
Kinfe edge pointer
Easily replicable glass and bezel
Panel mounting
45-55-65 Hz frequency range

Specificaties
Kenmerk Waarde
Cutout Height 45mm
Cutout Width 45mm
Depth 54mm
Minimum Temperature -10°C
Series Sigma
Maximum Temperature +55°C
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
11 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
34,55
(excl. BTW)
41,81
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 34,55
5 - 9
€ 33,51
10 +
€ 32,13
Related Products
LED tachometers with red 4-digit 8 mm LED.Displays ...
Description:
LED tachometers with red 4-digit 8 mm LED.Displays speed, rate and frequency.NPN, PNP, NAMUR, TTL or sinusoidal pulsed input signal 10 → 600 Vac.Displayed in seconds, minutes or hours.2 alarms with relay outputs.Measuring principle based on measurement of the input ...
The Lumel N24 series 4-digit LED digital panel ...
Description:
The Lumel N24 series 4-digit LED digital panel multi-function meter. It is designed to measure the temperature. Its service temperature ranges between -10°C and 55°C. Possible configuration of parameters is through the PD14 programmer and the free delivered LPConfig program. ...
For measuring rate, ratios, differences and passing time ...
Description:
For measuring rate, ratios, differences and passing time applications. An encoder is used to provide a pulsed input, the meter then calculate based on this to provide the operation required. A power supply is an option available to power the ...
Configurable indicator with the following features and functionality:• ...
Description:
Configurable indicator with the following features and functionality:• Process input for voltage ±10 V or current ±20 mA for voltage ±200 Vdc• Temperature input for PT100-3 wires, PT1000-2 wires for thermocouple J, K, T and N• Resistance input from 0,1 ...