RS PRO Round M12 Stainless Steel Anti-Vibration Mount 118kg Compression Load ,63.5mm dia. Natural Rubber

Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: IN
Productomschrijving

RS Pro Anti-Vibration Pedestal Mount

RS Pro anti-vibration pedestal mounts designed to take vertical load applied in both shear and compression to give maximum isolation from vibrating machinery. Suitable for use in a wide variety of applications including pumps, compressors, centrifugal fans and blowers.

RS Pro Anti-Vibration Mounts

Specificaties
Kenmerk Waarde
Type Vibration Mount
Thread Size M12
Diameter 120mm
Foot Height 35.3mm
Overall Height 35mm
Foot Shape Round
Static Load Capacity 118
Material Natural Rubber
Shore Hardness 60 Shore A
Metalwork Stainless Steel
Compression Load 118
Compression Deflection 4mm
Maximum Operating Temperature +100°C
Foot Colour Black
Series KPR
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
57,86
(excl. BTW)
70,01
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 57,86
5 - 9
€ 54,96
10 +
€ 53,22
Related Products
SF series to be used in compression only ...
Description:
SF series to be used in compression only applications. These mounts have a plate at the bottom instead of a bolt.All SUS versions are stainless steel equivalents. • Compression Dampens to a Lower Frequency than Rubber and Neoprene Mounts• Also ...
Originally designed for use with marine engines, the ...
Description:
Originally designed for use with marine engines, the Cushyfloat mounting is compact, low profile and combines 3 way control of suspended equipment. Supporting large static deflections, the design incorporates bump and rebound control features to limit excessive movement under shock ...
The KMC mounts are designed for use on ...
Description:
The KMC mounts are designed for use on heavy machinery and plant equipment so they are very robust. Compact fail-safe designMounts with cut-out in the rubber section are available where a different vertical/horizontal stiffness ratio is requiredApplications:Lorry or tractor cabsEngine ...
The RS PRO square anti-vibration mount has a ...
Description:
The RS PRO square anti-vibration mount has a diameter of 12.7mm and is made from PUR material. It has square, flat-topped bumper pads with a tapered profile that provides the largest surface contact area in the range. It has an ...