FIBET M12 Anti Vibration Mount, Bell Mount with 110daN Compression Load
- RS-stocknr.:
- 720-3477
- Fabrikantnummer:
- CFAB-W
- Fabrikant:
- FIBET
14 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
62 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 22,44
(excl. BTW)
€ 27,15
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 4 | € 22,44 |
| 5 - 9 | € 21,77 |
| 10 + | € 21,05 |
- RS-stocknr.:
- 720-3477
- Fabrikantnummer:
- CFAB-W
- Fabrikant:
- FIBET
Datasheets
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
Small Bell Mounts - Type CFAB
Low-profile and easy to install
Built-in fail-safe device to provide shock and failure protection for mobile, marine or seismic stationary applications
Provides large static deflection, low natural frequency (to 8Hz) and high isolation when the rubbber works in shear and compression
Applications include generator sets, engines, tool room machinery, pumps, HVAC, special equipment, etc.
Built-in fail-safe device to provide shock and failure protection for mobile, marine or seismic stationary applications
Provides large static deflection, low natural frequency (to 8Hz) and high isolation when the rubbber works in shear and compression
Applications include generator sets, engines, tool room machinery, pumps, HVAC, special equipment, etc.
Note
Additional bell mounts and isolation washers are available on the RS website.
Bell Mounts
Specificaties
Kenmerk | Waarde |
|---|---|
| Anti Vibration Mount Type | Bell Mount |
| Thread Size | M12 |
| Diameter | 63mm |
| Overall Height | 34mm |
| Material | Natural Rubber |
| Compression Load | 110daN |
| Metalwork | Zinc Plated Steel |
| Compression Deflection | 3.5mm |