MEMS audio single ended microphone

Wetgeving en compliance


• Single supply voltage operation 1.52 V - 3.6 V
• Omnidirectional sensitivity
• High signal-to-noise ratio
• High acoustic overload point: 130 dBSPL typ.
• Package compliant with reflow soldering
• Enhanced RF immunity
• Ultra-flat frequency response
• Low latency
• Ultra-low-power: 150 μA max
• ECOPACK®, RoHS, and “Green” compliant


The MP23ABS1 is a compact, low-power microphone built with a capacitive sensing element and an IC interface.

The sensing element, capable of detecting acoustic waves, is manufactured using a specialized silicon micromachining process to produce audio sensors.

The MP23ABS1 has an acoustic overload point of 130 dBSPL with a typical 64 dB signal-to-noise ratio.

The sensitivity of the MP23ABS1 is -38 dBV ±1 dB @ 94 dBSPL, 1 kHz.

The MP23ABS1 is available in a package compliant with reflow soldering and is guaranteed to operate over an extend

Kenmerk Waarde
Mounting Type Surface Mount
Package Type RHLGA
Pin Count 5
Dimensions 3.5 x 2.65 x 1.08mm
Length 3.5mm
Width 2.65mm
Height 1.08mm
Maximum Operating Supply Voltage 3.6 V
Maximum Operating Temperature +85 °C
Minimum Operating Supply Voltage 1.52 V
Minimum Operating Temperature -40 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06-11-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 5)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 45
€ 1,90
€ 9,50
50 - 495
€ 1,60
€ 8,00
500 - 995
€ 1,12
€ 5,60
1000 - 2495
€ 0,92
€ 4,60
2500 +
€ 0,86
€ 4,30
Related Products
The PGA57 microphone is ideal for use in ...
The PGA57 microphone is ideal for use in amplified instrument, acoustic drum performance and recording. Cardioid polar pattern picks up audio from the source rejecting unwanted noise. Professional microphoneTailor made microphone cartridge for clear sound source reproductionBlack metallic finishStand adapter ...
The Infineon is an omnidirectional, surface mount LLGA ...
The Infineon is an omnidirectional, surface mount LLGA package dual-backplate MEMS technology sound sensor with a 5-pin microphone. Its electrical rating is 3.6V with 1.3mA current. This technology is based on a miniaturized symmetrical microphone design, similar to that used ...