Through Hole Audio Transformer 600Ω 2mW

  • RS-stocknr. 123-7228
  • Fabrikantnummer Z1682E
  • Fabrikant OEP
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CH
Productomschrijving

OEP Z16 Series Audio Transformers

The OEP Z16 range of audio transformers are constructed with an interwinding screen and centre tap. Various different impedance ratios are available, and these audio transformers can be used in reverse with the centre tap on the primary. Z16 audio transformers are low power and suitable for PCB mounting.

Product Application Information

Recommended applications for these audio transformers include ground loop isolating microphone inputs and impedance matching.

Specificaties
Kenmerk Waarde
Primary Impedance 150Ω
Secondary Impedance 600Ω
Primary DC Resistance 29.5Ω
Power Rating 2mW
Secondary DC Resistance 150Ω
Dimensions 18 x 18 x 15mm
Mounting Type Through Hole
Termination Type PC Pin
Weight 14g
Depth 15mm
Length 18mm
Width 18mm
Minimum Temperature -20°C
Minimum Operating Frequency 40Hz
Core Type Laminated
Isolation Voltage 1000V
Construction Enclosed
Turns Ratio 1:2 C.T
Maximum Temperature +75°C
Maximum Operating Frequency 20kHz
7 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
8,97
(excl. BTW)
10,85
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 8,97
10 +
€ 8,07
Related Products
From Murato Power Solutions, a range of low ...
Description:
From Murato Power Solutions, a range of low profile digital audio transformers designed to improve the balance between transmitter and receiver circuitry. Ideal for use wherever high-performance audio transmission is required, these digital audio transformers are fully encapsulated and have ...
A187A14C microphone transformers from OEP are ideal for ...
Description:
A187A14C microphone transformers from OEP are ideal for signal splitting and impedance matching. They are encapsulated in a mumetal can and constructed with multiple electrostatic screens. These audio transformers provide dual primary impedance for matching 150 Ω to 15 kΩ. ...
A187A15C microphone transformers from OEP are ideal for ...
Description:
A187A15C microphone transformers from OEP are ideal for impedance matching and signal splitting. They are encapsulated in a shielding mumetal can and constructed with multiple electrostatic screens. These audio transformers match 150 Ω to 150kΩ. A187A15C audio transformers are suitable ...
A187A16C/1 microphone transformers from OEP have been designed ...
Description:
A187A16C/1 microphone transformers from OEP have been designed for matching low output moving coil pickups to balanced valve pre-amplifiers. These audio transformers are ideal for impedance matching and signal splitting. A low distortion core enables low harmonic distortion while multi-layered ...