Neutrik XCR Series Coloured Identifier Collar for use with X Series XLR Cable Connector

  • RS-stocknr. 448-7186
  • Fabrikantnummer XCR 0-9
  • Fabrikant Neutrik
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: LI
Productomschrijving

P Series XLR Panel Connectors

Precision engineered audio connectors. Their construction ensures reliable connection for both power and low level signal circuitry. Connector/Cable assembly is straightforward employing a minimal number of parts (no assembly screws used). Parts are polarised and securely fitted thereby eliminating connector noise. Available in either nickel or black chrome finishes. A latch secures mated connectors. Suitable hole punches for panel mounting parts: For type MP stock no.543-591 and for type FP1 stock no. 543-579.

Identification boots supplied in a bag of 9 colours, Blue, Brown, Green, Grey, Orange, Purple, Red, White, Yellow and Black.
Identification collars in a bag of 10 colours: Blue, Brown, Green, Grey, Orange, Purple, Red, White, Yellow and Black, Black only.

//media.rs-online.com/t_line/L405590-01.gif
//media.rs-online.com/t_line/L405590-02.gif

Warning

  • Not to be used as mains connectors
Specificaties
Kenmerk Waarde
Accessory Type Coloured Identifier Collar
For Use With X Series XLR Cable Connector
Series XCR
650 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Bag of 10)
0,481
(excl. BTW)
0,582
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
10 - 40
€ 0,481
€ 4,81
50 - 90
€ 0,456
€ 4,56
100 - 240
€ 0,433
€ 4,33
250 - 490
€ 0,409
€ 4,09
500 +
€ 0,385
€ 3,85
*prijsindicatie
Related Products
The Conec2 CLB50-RCA is a 50mm Snap-in Module ...
Description:
The Conec2 CLB50-RCA is a 50mm Snap-in Module featuring RCA Phono Connectors on the front of themodule and screw terminals to the rear. Conec2 RCA Phono Snap-in ModuleScrew Terminals to the rearSimply snaps into place in Conec2 (50mm) Faceplates.
The Conec2 CLB50-BB is a 50mm Banana Socket ...
Description:
The Conec2 CLB50-BB is a 50mm Banana Socket Coupler Snap-in Module featuring 2 x Banana Socket on the front and rear of the module. Conec2 2 x Banana Socket Coupler Snap-in ModuleBanana Socket to Banana Socket CouplerSimply snaps into place ...
The Conec2 CLB50-HO is a 50mm Snap-in Blank ...
Description:
The Conec2 CLB50-HO is a 50mm Snap-in Blank Filler Module with Cut-out hole. Conec2 Blank Filler Snap-in Module with Cut-out holeSimply snaps into place in Conec2 (50mm) FaceplatesManufactured in high quality ABS plastic.
A range of modular AV & Data faceplate ...
Description:
A range of modular AV & Data faceplate modules plates. Conec2 is a brand new range of ’snap-in’ Audio Visual FaceplateModules which provides unlimited flexibility for AV, data and communications connectivity. Conec2 individual USB Charging Point5V 1Amp supplyIdeal for charging ...