Single Gang AV Faceplate

  • RS-stocknr. 768-4330
  • Fabrikantnummer CLB45DP-270A
  • Fabrikant CIE
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Conec2 AV Desk Riser Pod housing 12 x 45x25mm modules

Fully retractable, thru desk Conec2 AV Desk Riser Pod
Accepts up to 12 (45x22.5mm) Conec2 AV Modules
Bespoke configuration of AV connectors
Simple pull-up / push-down Pod
Above and below desk cable access
Manufactured in high quality ABS plastic and aluminium
Wide range of AV Connector Modules available including HDMI, VGA, USB, RJ, BNC and power

The new Conec2 AV Desk Riser Pod from Clever Little Box provides a simple, effective pop-up AV connectivity solution which can be flush-mounted into a desk, table or cupboard. The CLB45DP-270A version accepts twelve (45x22.5mm) Conec2 AV modules.

Conec2 Modular Faceplate Range

A range of modular AV & Data faceplate modules plates. Conec2 is a brand new range of ’snap-in’ Audio Visual Faceplate
Modules which provides unlimited flexibility for AV, data and communications connectivity.

Specificaties
Kenmerk Waarde
Size Single Gang
Type of Connectors AV
Height 270mm
Width 45mm
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
2 x Easy-install solderless VGA sockets2 x RCA ...
Description:
2 x Easy-install solderless VGA sockets2 x RCA audio sockets (left and right)1 x RCA video socket1 x 3.5mm PC socket1 x USB B Male to USB B Female 3m whiteboard flying lead1 x RJ45 back-to-back socket.
The Conec2 CLB50-HO is a 50mm Snap-in Blank ...
Description:
The Conec2 CLB50-HO is a 50mm Snap-in Blank Filler Module with Cut-out hole. Conec2 Blank Filler Snap-in Module with Cut-out holeSimply snaps into place in Conec2 (50mm) FaceplatesManufactured in high quality ABS plastic.
The Conec2 CLB45-PHJ is a 45mm Snap-in Module ...
Description:
The Conec2 CLB45-PHJ is a 45mm Snap-in Module featuring 3.5mm Stereo Audio Connector to the front of the Module and screw terminals to the rear. Conec2 Snap-in Module featuring 3.5mm Stereo Audio JackScrew terminals to the rearSimply snaps into place ...
Conec2 Reducer Snap-in Module will converts a standard ...
Description:
Conec2 Reducer Snap-in Module will converts a standard 50mm x 50mm module to provide compatibility with the complete range of 45mm connector modules. Faceplate reducerSimply snaps into place in Conec2 FaceplatesHuge range of AV connector modules availableManufactured in high quality ...