JAE MX23A Series 40 Way Connector Housing for use with Automotive Connectors

  • RS-stocknr. 731-9023
  • Fabrikantnummer MX23A40XF1
  • Fabrikant JAE
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MX23A 40 Way Socket Connector Components

The complete JAE MX23A 40 way connector requires:,Housing socket stock number 731-9020, Orange Front Cap stock number 731-9023, Socket Contacts (Crimp) stock number 731-9027, and optionally Dummy Pins (for use when the socket housing does not have all cavities loaded) stock number 731-9036

Note

For JAE MX23A mating headers see stock number 435-774 typical.
For JAE MX23A Crimp tool see stock number 437-083

JAE MX23A Range

JAE MX23A Waterproof Connectors can be used for wide range sealed equipment in the automotive industry including automobiles, motorcycles and so on. The JAE MX23A Waterproof Connector is sealed by having a Sealing Ring in the mating area and by a Grommet in the wire crimping area for full protection against the ingress of water.
JAE MX23A Waterproof Connectors are a low profiled type with a board mounting height of 18.3 mm and a socket connector height of 22.2 mm maximum.
JAE MX23A Waterproof Connectors have a double fin structured socket contact for high reliability. The socket contact also has a large chamfer on the front-edge to prevent damage to the grommet.
JAE MX23A Waterproof Connectors ensure complete insertion of the socket contact into its housing due to any incomplete insertions being easily detected during the front cap mounting process.

Specificaties
Kenmerk Waarde
Accessory Type Connector Housing
For Use With Automotive Connectors
Series MX23A
Number of Contacts 40
21 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
169 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
5,26
(excl. BTW)
6,36
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 5,26
10 - 24
€ 4,41
25 - 49
€ 4,19
50 - 99
€ 3,66
100 +
€ 3,56
Verpakkingsopties
Related Products
A range of insulation boots for use with ...
Description:
A range of insulation boots for use with FASTON 250 crimp terminals. These FASTON 250 insulation boots are made from transluscent plastic and are available in both straight and flag configurations.
A range of female crimp connector contacts for ...
Description:
A range of female crimp connector contacts for use with TE Connectivity Junior Power Timer Connectors. The socket contacts are suitable for 0.35 mm² and 0.75 mm² wire. See part number 718-6704 for a typical socket housing.
A range of socket and pin crimp contacts ...
Description:
A range of socket and pin crimp contacts for the Econoseal J series automotive wire connectors. All connectors are designed to be used with thin walled non-irradiated PVC cablesThough designed initially for automotive applications, Econoseal III can be used in ...
Introducing the SICMA series of plug housings from ...
Description:
Introducing the SICMA series of plug housings from Delphi. Versatile, durable and easy configuration for coupling connectors together. Keeping everything connected. • High sealing performance ensured by rear mat-seal and a circumferential interface seal, ensuring the contacts cannot back out ...