TE Connectivity, EconoSeal J Mark II Female Terminal for use with Automotive Connectors

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity Econoseal J Series Connector Contacts

A range of socket and pin crimp contacts for the Econoseal J series automotive wire connectors.

TE Connectivity Econoseal Connector System

Designed to meet the exacting requirements of the automotive industry, for a reliable sealed connector.

All connectors are designed to be used with thin walled non-irradiated PVC cables
Though designed initially for automotive applications, Econoseal III can be used in any industry where a reliable sealed connector is needed

Specificaties
Kenmerk Waarde
Series EconoSeal J Mark II
Gender Female
50 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
9200 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 50)
0,068
(excl. BTW)
0,082
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 - 1200
€ 0,068
€ 3,40
1250 - 3700
€ 0,061
€ 3,05
3750 - 9950
€ 0,054
€ 2,70
10000 - 19950
€ 0,048
€ 2,40
20000 +
€ 0,044
€ 2,20
*prijsindicatie
Verpakkingsopties
Related Products
Female receptacle crimp contacts for use with SUPERSEAL ...
Description:
Female receptacle crimp contacts for use with SUPERSEAL Series 1.0 automotive connectors. These crimp contacts are made from copper alloy with a gold over nickel contact area and a tin over nickel crimp area. Sturdy and reliable contactsDouble contact spring ...
AT Series connectors are a high performance, cost ...
Description:
AT Series connectors are a high performance, cost effective solution able to be used in a variety of interconnect applications: Heavy Duty, Transportation, Marine, Diagnostic, Military, Alternative Energy and Agricultural. They contain superior environmental seals and seal retention capabilities. The ...
Stac64™ CTX64 female Receptacle Crimp Terminals made from ...
Description:
Stac64™ CTX64 female Receptacle Crimp Terminals made from tin plated copper alloy. These female Receptacle Crimp Terminals can accept a wire from 0.22 to 0.85 mm2 with an insulation diameter of 1.3-1.85 mm. These Crimp Terminals are for use with ...
Receptacle crimp terminals for use in NSCC series ...
Description:
Receptacle crimp terminals for use in NSCC series 98816, 98817, 98821 and 98273 power connector housings.. These NSCC female crimp terminals are made from tin plated high conductivity copper and accept a wire size range of 0.49 to 0.94mm2.