- RS-stocknr.:
- 680-7765
- Fabrikantnummer:
- 3-1437290-7
- Fabrikant:
- TE Connectivity
- RS-stocknr.:
- 680-7765
- Fabrikantnummer:
- 3-1437290-7
- Fabrikant:
- TE Connectivity
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
TE Connectivity SUPERSEAL Series 1.0 mm Plug Housing Assembly
Introducing the Superseal series of plug housings from TE Connectivity. Durable & reliable design, facilitating the mounting between your PCB boards, either through cabling/wiring or fitting further PCB boards together. The Superseal series has a contact size of 1 mm. and comes as either right-angle or straight body orientation.
Features and Benefits
Durability: After cap housing is connected, the plug housing is mated and then 78.4 N force is applied in a rocking motion. 25 test cycles.
Thermoplastic / PET housing for reliable performance/resistance. The outer material is lightweight and allows design flexibility.
The SUPERSEAL series has built-in secondary locking mechanisms which facilitate contact insertion into the housing, thus preventing the contacts from backing out during mating.
Polarization key as standard, helping prevent the insertion of another circuit board unless properly slotted in.
A varied amount of contacts (26, 34 & more) suitable in a wide array of industrial sockets.
3 mm pitches available.
Applications
Industrial controls
Networking systems
Some household appliances
Features and Benefits
Durability: After cap housing is connected, the plug housing is mated and then 78.4 N force is applied in a rocking motion. 25 test cycles.
Thermoplastic / PET housing for reliable performance/resistance. The outer material is lightweight and allows design flexibility.
The SUPERSEAL series has built-in secondary locking mechanisms which facilitate contact insertion into the housing, thus preventing the contacts from backing out during mating.
Polarization key as standard, helping prevent the insertion of another circuit board unless properly slotted in.
A varied amount of contacts (26, 34 & more) suitable in a wide array of industrial sockets.
3 mm pitches available.
Applications
Industrial controls
Networking systems
Some household appliances
3-1437290-7 Features:
Housing for female Terminals
Mating Pin Diameter 1mm
Connector system wire to board and wire to device
26 positions, 4 rows
Centerline (Pitch) 3mm
Primary locking feature integrated in the housing
Sealable
Operating voltage 250 Vac
Dimensions (WxLxH): 32.2 x 32.15 x 34.55 mm
Degree of protection JIS D0203
UL 94V-2 flammability rating
Temperature range -40 to +125°C
Straight body orientation
Mating Pin Diameter 1mm
Connector system wire to board and wire to device
26 positions, 4 rows
Centerline (Pitch) 3mm
Primary locking feature integrated in the housing
Sealable
Operating voltage 250 Vac
Dimensions (WxLxH): 32.2 x 32.15 x 34.55 mm
Degree of protection JIS D0203
UL 94V-2 flammability rating
Temperature range -40 to +125°C
Straight body orientation
TE Connectivity SUPERSEAL Connectors, 1.0 mm and 1.5 mm System
Developed to meet the constantly increasing needs and requirements for safety and reliability in the electrical connection field, these connectors fulfill all the requirements prescribed by the various automotive and industrial standards. Typical applications include various automotive sensor devices, oil pressure senders, water temperature monitoring or any application requiring waterproof protection to IP67.
Features and Benefits
Sturdy and reliable contacts
Double contact spring design
Secondary lock ensures correct and complete insertion of the contact
Silicone rubber seals
Double contact spring design
Secondary lock ensures correct and complete insertion of the contact
Silicone rubber seals
Specificaties
Kenmerk | Waarde |
---|---|
Number of Contacts | 26 |
Type | Housing for Female Terminals |
Gender | Male |
Number of Rows | 4 |
Mounting Type | Cable Mount |
Series | AMP Superseal 1.0 |
Colour | Black |
Height | 34.55mm |
Width | 32.2mm |
Housing Material | PET |
Depth | 32.15mm |