ebm-papst 8400N Series Axial Fan, 80 x 80 x 25mm, 79m³/h, 2.4W, 24 V dc

  • RS-stocknr. 394-5394
  • Fabrikantnummer 8414NH
  • Fabrikant ebm-papst
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: HU
Productomschrijving

ebm-papst 8400 N Series DC Axial Fans

What is A DC Axial Fan?

DC axial fans are designed to create airflow with a high flow rate and medium pressure. Axial fans have an impeller surrounded by blades which works in a similar way to a propeller. The motor of the fan is integrated into the hub of the impeller to provide a compact fan unit. The impeller draws in air axially in a parallel direction to the revolving motor shaft and forces air out in the same direction. The axial fan is surrounded by a flanged housing with mounting holes allowing it to be mounted inside equipment

Efficient and Reliable Motor

• External Rotor Motor: Unlike traditional internal rotor motors where the rotating shaft is surrounded by electromagnetic coils ebm-papst fans feature an external rotor motor. In an external rotor motor the magnetic coils are encased inside a rotating shell. The advantage of this design is that external rotor motors are more compact in size, run more efficiently and are less prone to overheating than internal rotor motors
• Brushless Motor: These DC fans have brushless motors where the electrical switching is carried out by electronic circuits rather than metal brushes. As they don't have any brushes to wear out, brushless motors are more efficient and reliable than AC motors and have a longer life span. The integrated electronics of brushless motors also allow extra interface options and motor protection to be built into the fan.

Expertly Designed

The fan impellers and the inner shape housing of the ebm-papst compact DC axial fans are expertly designed using state-of-the-art computer software. The blades are aerodynamically engineered and dynamically balanced in two planes for optimum performance. The air output and motor performance are precisely matched to the size of the fan which results in low noise, even at high back pressure.

Key Features and Benefits of the EBM Papst 8400 N and 8400 NG Series

• Performance from 33m3/h to a maximum of 79m3/h, depending on variant
• Low, medium and high speed versions available
• Fan motor integrated into the impeller hub to form a compact fan unit
• External rotor motor with efficient and reliable brushless design
• Air exhaust over the struts
• Compact 80 x 80 mm design with small installation depth of 25 mm
• Expertly designed for maximum efficiency and performance
• Choice of durable ball bearings for high ambient temperatures and high service life or PAPST Sintec sleeve bearings for low noise and low shock sensitivity
• Aerodynamic blades for low noise level and increased efficiency
• Flanged housings with mounting holes for installation into equipment
Lightweight design with glass fibre reinforced plastic housing and impeller
• Reverse polarity and locked rotor protection
• IP20 protection rating
• Service life of 117500 hours and above

How Do I Connect the Fan?

These 8400 N series DC axial fans feature AWG 24, TR 64 single wires which are stripped and tin plated at the end.

What Accessories are Available?

• Metal and plastic finger guards: stock numbers 826-1376, 826-1379, 250-870, 101-8068, 512-569 and 826-1373
• Filter Fan Guard: stock number 221-336, 507-911 and 200-7659

Applications

These DC axial fans are designed for hot or cold air exchange in a wide range of devices and systems. These applications include the following:

• Audio/Video
• Catering
• Control equipment
• Data storage
• Domestic Appliances
• Electronics
• Heating and Ventilation
• Laboratory
• Lasers
• Lighting
• Machines & Industrial
• Pharmaceutical
• Power optimisation
• Power Supplies

Approvals

-

Specificaties
Kenmerk Waarde
Dimensions 80 x 80 x 25mm
Supply Voltage 24 V dc
AC or DC Operation DC
Height 80mm
Power Consumption 2.4W
Width 80mm
Depth 25mm
Maximum Current 100mA
Air Flow 79m³/h
Noise Level 37dB
Fan Speed 3600rpm
Bearing Type Ball
Series 8400N
217 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2198 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
28,85
(excl. BTW)
34,91
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 28,85
5 - 9
€ 26,25
10 - 24
€ 23,80
25 - 49
€ 21,64
50 +
€ 20,19
Related Products
DC Fan with electronically commutated external rotor motor.Electronic ...
Description:
DC Fan with electronically commutated external rotor motor.Electronic protection against reverse polarity, blocking and overloading by PTC-resistor, partially impedance protected.Impellor of fibre-glass reinforced plastic PA. Housing with ground lug M4 x 8 screws.External connection via leads AWG22 TR64, stripped ...
ebm-papst high performance ball bearing fans are an ...
Description:
ebm-papst high performance ball bearing fans are an ideal soultion to a wide range of applications, featuring fibreglass-reinforced plastic and completely integrated electronic commutation. Material: fibreglass-reinforced plasticFully integrated electronic commutationProtected against reverse polarity and ...
Sunon's Philosophy of 'Brand, Innovation, and Value' is ...
Description:
Sunon's Philosophy of 'Brand, Innovation, and Value' is driven by developing and innovating their core motor technology. The result is a range of reliable Fans suitable for a wide range of cooling applications. Sunon offer thermal fan solutions to the ...
Ebm-papst ingress protected IP68 fans are ideal for ...
Description:
Ebm-papst ingress protected IP68 fans are ideal for operation in the harshest of environments. These fans are designed to perform subject to high dust, high humidity and direct water exposure both in and outdoors. They are ideal for wash-down situations ...