RS PRO Motherboard Epoxy Glass Fabric Laminate 1 84 HP With 20.32 mm Connector Pitch

RS-stocknr.:: 110-2444
Fabrikant:: RS PRO

RS PRO Motherboard Epoxy Glass Fabric Laminate 1 84 HP With 20.32 mm Connector Pitch

Afbeelding representeert productcategorie

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 170,35

(excl. BTW)

€ 206,12

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

1 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 1	€ 170,35
2 - 4	€ 165,24
5 - 39	€ 160,13
40 +	€ 157,74

*prijsindicatie

RS-stocknr.:: 110-2444
Fabrikant:: RS PRO

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	RS PRO
	Product Type	Motherboard
	Sub Type	Mother Board
	Board Material	Epoxy Glass Fabric Laminate
	Number of Sides	1
	Horizontal Pitch	84HP
	Pitch	20.32mm
	Copper Thickness	35μm
	Board Thickness	1.6mm
	External Height	128.6mm
	Standards/Approvals	DIN 41612, DIN 41494

	Alles selecteren
	Merk RS PRO
	Product Type Motherboard
	Sub Type Mother Board
	Board Material Epoxy Glass Fabric Laminate
	Number of Sides 1
	Horizontal Pitch 84HP
	Pitch 20.32mm
	Copper Thickness 35μm
	Board Thickness 1.6mm
	External Height 128.6mm
	Standards/Approvals DIN 41612, DIN 41494

Land van herkomst:: GB

Microbus with earth plane

This Microbus is designed for use with DIN 41612 64 // 96 or 96 // 96 connectors.

Pins 1 and 32 on rows a and l are for 0 V with full 0 V display panel on one side of the plate. Pins 2 and 31 on rows a and c are for Vdc, which therefore clears 56 separate signalling lines.

The width of the plate is from 42 → 84 E.

The female 64 // 96 and 96 // 96 solder or wrap connectors are ordered separately.

High reliability thanks to the metal holes.

Minimum crosstalk.

DIN 41494 (KM6-II) compatible.

Protective lacquer to prevent solder bridges.

PC / VME Bus Boards

PC Compatible Prototyping Boards

Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.

Microboard Pattern

Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.