96 Way DIN 41612 Eurocard Motherboard FR4 Double Sided 95.7mm 20.32mm(4HP)

Wetgeving en compliance
Land van herkomst: GB

Double-Sided, Non-Allocated Motherboards

Complete flexibility of positioning of Vdc or earthing.
Four voltage lines available.
Option to connect power supply using 6.3 mm terminal type faston or M3 thread.
Choice of various widths and pitches of connectors.
Row b can be used as a 0 V reserve line, in order to minimise crosstalk on rows a and c. Contacts 1, 2, 31 and 32 are allocated via a 2.54 mm pitch connection. Other contacts can be allocated by wiring or wrapping. Rows a, b and c can be connected together using strap connectors (designed to connect DIN connector pins).
Boards feature high-quality foil laminate holes with varnish to avoid solder bridges.

PC / VME Bus Boards

PC Compatible Prototyping Boards

Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 in.). Diameter holes are pre-drilled on a 2.54 mm (0.1 in.) matrix.

Microboard Pattern

Incorporates, on the component side of the card, a colander ground plane for maximum screening and glitch free high speed operation, and complete solder mask protection.

Kenmerk Waarde
Connection DIN 41612
Number of Contacts 96
Base Material Epoxy Glass Fabric Laminate
Number of Sides 2
Height 128.6mm
Horizontal Pitch 95.7mm
Thickness 1.6mm
Pitch 20.32mm
Copper Thickness 35µm
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 49,57
5 - 9
€ 47,58
10 - 39
€ 45,60
40 +
€ 43,62
Related Products
Double sided backplanes 3U high with pth for ...
Double sided backplanes 3U high with pth for high reliability which will accept DIN41612 connectors. Suitable for use with subracks to IEC297-3. 96//96-way suitable for high speed logic systems where screening is required between each signal line. Can also be ...
A 64-way single-sided Eurocard backplane suitable for use ...
A 64-way single-sided Eurocard backplane suitable for use with 64//96 (a/c) DIN 41612 indirect edge connectors, in conjunction with Eurocard sub-racks to DIN 41494, e.g. the RS eurocard sub-rack system (except 4HP and 10HP card fronts).,Dimensions: Height 3U. Width 84HP. ...
This series of nut plates is designed to ...
This series of nut plates is designed to give technicians the ability to fine-tune the backplane to the requirements of their system. Each hole is a through-hole and the connector can be wired to series B as OV to prevent ...