45mm Self Aligning Ball Bearing 100mm O.D

  • RS-stocknr. 506-371
  • Fabrikantnummer 2309E-2RS1TN9
  • Fabrikant SKF
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: SE
Productomschrijving

Double Row Self - Aligning

Radial Self-Aligning Ball Bearing

These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals (rubbing seals) made from oil-resistant, non-wearing synthetic rubber with steel reinforcement on both sides (Type 2RS1).

Open Bearings

ETN9 and KTN9 are Open self-aligning bearings without a seal available in parallel or Taper bores.

Sealed bearings

2RS1TN9 are sealed (NBR) bearings packed with grease with a lithium thickener suitable for temperatures from -40°C to + 100°C. They are sealed for life, so should not be heated above 80°C before mounting and must not be washed out under any circumstances.

TN suffix denotes polyamide cage

Supplied with

instruction leaflet.

//media.rs-online.com/t_line/L285124-12.gif
Specificaties
Kenmerk Waarde
Inside Diameter 45mm
Outside Diameter 100mm
Ball Bearing Type Self Aligning
Race Width 36mm
End Type Sealed
Number of Rows 2
Static Load Rating 13.4kN
Material Steel
Cage Material Fibreglass Reinforced PA
Race Type Plain
Dynamic Load Rating 39kN
Bore Type Parallel
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 23-10-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
126,87
(excl. BTW)
153,51
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 126,87
5 - 9
€ 121,80
10 - 24
€ 119,26
25 +
€ 116,71
Related Products
The BSF series of bearings is equivalent to ...
Description:
The BSF series of bearings is equivalent to the BSN range of bearings, with an extended outer ring, with bolt holes for easy direct mounting. Relubrication holes in outside surface and face of the outer ring allow for relubrication during ...
The RS PRO 6009-2RS/C3 45X75X16mm single row, deep ...
Description:
The RS PRO 6009-2RS/C3 45X75X16mm single row, deep groove ball bearing, offers versatility and overall high performance. The sealed ball bearing is fitted with synthetic rubber seals to prevent dirt and other items entering the bearing. It is primarily intended ...
If there is skewing between the outer and ...
Description:
If there is skewing between the outer and inner ring (for the compensation of angular misalignments)For bearing arrangements with high radial loadsFor higher speeds on account of their point contact, than barrel roller bearings with line contactWhere bearings with the ...
Single-row deep groove ball bearings are the most ...
Description:
Single-row deep groove ball bearings are the most common type of rolling bearings. These shielded (2Z or ZZ) bearings from NSK are fitted with two metal dust shields to prevent the ingress of dirt and foreign matter into the bearing ...