14mm Linear Ball Bearing 21mm O.D

  • RS-stocknr. 137-1570
  • Fabrikantnummer KH14PP
  • Fabrikant INA
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Linear Ball Bearings

INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available. The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.
The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.

Features and Benefits

• Lower operating costs • Reduced maintenance due to improved lubrication
• Lower heat generation
• Less noise

Product Application Information

Due to the closed design, these linear bearings are suitable for use on shafts.

Suffixes

PP - Lip seals on both sides

INA

Specificaties
Kenmerk Waarde
Inside Diameter 14mm
Outside Diameter 21mm
Ball Bearing Type Linear
Race Width 28mm
End Type Sealed
Number of Rows 1
Static Load Rating 760N
Material Steel
Cage Material Plastic
Race Type Plain
Dynamic Load Rating 830N
Bore Type Parallel
14 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
20,68
(excl. BTW)
25,02
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 20,68
5 - 9
€ 19,86
10 - 24
€ 19,45
25 +
€ 19,02
Related Products
Precision housingCompact Linear Bushing StandardClosed typeTwo internal sealsLubricated ...
Description:
Precision housingCompact Linear Bushing StandardClosed typeTwo internal sealsLubricated with Dynalub 510.
The Super-Linear Bushing has a built-in inertial error ...
Description:
The Super-Linear Bushing has a built-in inertial error compensator, that compensates for the angle between the housing and shaft up to 0.5 degrees tilt without reducing the capacity due to angular pressure. Possible causes for internal errors include shaft flex ...
The Compact Linear Bushing is distinguished by its ...
Description:
The Compact Linear Bushing is distinguished by its compact dimensions. Through the use of integrated metal locking rings, this type eliminates the need for the otherwise typical axial fasteners in the mounting hole. Also available in corrosion-resistant format. Low cost ...
The standard linear bushing is extremely robust thanks ...
Description:
The standard linear bushing is extremely robust thanks to its steel ball retainer and designed for applications with a high level of soiling, such as woodworking. Standard linear bushings without seals are available for use at very high temperatures. The ...