40mm Radial Ball Bearing 80mm O.D

  • RS-stocknr. 137-1813
  • Fabrikantnummer GRAE40-XL-NPP-B
  • Fabrikant INA
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: SK
Productomschrijving

Radial Insert Ball Bearings with Eccentric Locking Collar

INA from Schaeffler classic radial insert ball bearings are located on the shaft with a locking collar. They are suitable for bearing arrangements with a constant direction of rotation or, under low speed and load, for an alternating direction of rotation. The locking collar is preferably tightened in the direction of rotation and secured with a grub screw. This location method prevents damage to the shaft and can be easily loosened again.
The P seal is two zinc-coated sheet steel washers with intermediate NBR part, seal lip axially preloaded.
The R seal is two zinc-coated sheet steel washers extended outwards and angled downwards with intermediate NBR part and radially preloaded seal lip. Better protection against mechanical damage.
Substantial grease reservoir due to the space between the extended and angled sheet steel washers. Used in radial insert ball bearings with inner ring extended on both sides.
To protect the seal lip from mechanical damage, the outer sheet steel washer extends a considerable distance down towards the bearing inner ring.
In addition to bearings with a spherical outer ring (GRAE..-NPP-B and GE..-KRR-B), there are also cylindrical (RAE..-NPP and RALE..-NPP)

Features and Benefits

• Lower operating costs • Reduced maintenance due to improved lubrication
• Lower heat generation
• Less noise
• Protected against fretting corrosion
• Shaft diameters from 12 mm to 60 mm (RAE..NPP) and (GRAE..-NPP-B)
• Shaft diameters from 20 mm to 30 mm (RALE..NPP)
• Shaft diameters from 17 mm to 120 mm (GE..-KRR-B)

Suffixes

FA106 - Bearing subjected to special noise testing B - Bearing with special outer ring
NPP - Lip seals on both sides (P type seal)
KRR - Lip seals on both sides (R type seal)

INA

Specificaties
Kenmerk Waarde
Inside Diameter 40mm
Outside Diameter 80mm
Ball Bearing Type Radial
Race Width 21mm
End Type Sealed
Number of Rows 1
Static Load Rating 19800N
Material Steel
Race Type Plain
Dynamic Load Rating 34500N
Bore Type Parallel
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 03-12-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
51,27
(excl. BTW)
62,04
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 51,27
5 - 9
€ 49,23
10 - 24
€ 48,20
25 +
€ 47,17
Related Products
These bearings are designed to accommodate shaft deflection ...
Description:
These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals ...
SKF Ball Bearings are designed to deliver increased ...
Description:
SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperatures.Features:• Excellent performance in hot conditions, dry environments and low rotational speed applications• Temperature range -30°C to 150°C• Suitable ...
FAG from Schaeffler double row angular contact ball ...
Description:
FAG from Schaeffler double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. They correspond in design to single row angular contact ball bearings ...
INA from Schaeffler linear ball bearings KH and ...
Description:
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which ...