Battery Charger Extension for Lead Acid Battery Charger

  • RS-stocknr. 905-3612
  • Fabrikantnummer O03
  • Fabrikant TecMate
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

OptiMATE Charge Cable Extender

OptiMATE extension cables for use with OptiMate Battery Chargers with SAE connectors. A premium charge cable extenders with weather protected in-line connection system

Ideal for on-vehicle use in all normal and ’below freezing’ temperatures
6ft extender cable
Thick copper 16 / 18 SWG cable
Connector/cable rated at 15 Amps
Electrical connections between cable and connector pins are fully sealed
Accepts any rubber shroud designed for OptiMate SAE connector

Simply plug one end into the outlet lead of the OptiMate and the other end into the accessory cable (e.g. eyelet lead as supplied with OptiMate, or other SAE accessory). Heavy-duty cable to prevent Voltage drop

Specificaties
Kenmerk Waarde
For Use With Lead Acid Battery
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was € 14,07
11,99
(excl. BTW)
14,51
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 11,99
Related Products
Monitor charge of your stored power sport vehicle ...
Description:
Monitor charge of your stored power sport vehicle 12V lead-acid battery or confirm if the vehicle charging system is working correctly. Active charging system monitoring: 13.5V 'acceptable' and 14V 'good' levelsIndustry standard SAE charge port3 LEDs display battery status for ...
3-step charge control with current detectionUniversal input voltage ...
Description:
3-step charge control with current detectionUniversal input voltage (90-264 VAC)Wake up and low current start-up of deeply discharged batteriesError indication for reverse polarity, short circuit, charging of lower voltage batteries and safety timer run-out.
The 3 modes (constant current, timed constant voltage, ...
Description:
The 3 modes (constant current, timed constant voltage, continuous ’float’) optimise the charging process and permit the charger to be left connected indefinitely3-colour LED charge status indicatorInput: 190 to 264VReverse-polarity and short-circuit protectedLow leakage current - unit can be left ...
Output Voltages: 405-8637 - 24V 405-8621 - 12V. ...
Description:
Output Voltages: 405-8637 - 24V 405-8621 - 12V. The three-stage regime permits the charger to be left connected indefinitely3 colour LED charge status indicationWide input rangeApproved for medical applications2240 2pin IEC 320 (C8) Mains input, exchangeable 2.1/2.5mm adapter output.2040 / ...