Battery Charger Mounting Brackets for use with 2A Mascot Lead Acid Charger, 4A Mascot Lead Acid Charger

  • RS-stocknr. 423-7600
  • Fabrikantnummer 9000000129
  • Fabrikant Mascot
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Switch Mode, 3-Stage, 2240/9940/2040 Series, 6V 12V and 24V Lead Acid Chargers

The three-stage regime permits the charger to be left connected indefinitely
3 colour LED charge status indication
Wide input range
Approved for medical applications
2240 2pin IEC 320 (C8) Mains input, exchangeable 2.1/2.5mm adapter output.
2040 / 9940 3pin IEC 320 (C8) Mains input, crocodile clip output
Mounting brackets available separately (423-7593 for 2.3 & 1.3A, 423-7600 for 2 & 4A)
AC plug to IEC 320 / 2 pin C8

Output Voltages:
405-8637 - 24V
405-8621 - 12V

Note

Chargers are not supplied with mains leads, these should be ordered separately for 2040 series see stock no. RS 452-669 and 873-0702 and UK, RS 321-203 DK, NO, SE, DE and AT, BE and NL for 2240 and 9940 series see stock no. RS 452-669
For Australia / NZ mains lead see RS 488-2806

Standards

EN 60950, EN 60335-2-29, UL2601-1

//media.rs-online.com/t_line/LD364417-01.jpg
//media.rs-online.com/t_line/LF367845-99.jpg
Specificaties
Kenmerk Waarde
For Use With 2A Mascot Lead Acid Charger, 4A Mascot Lead Acid Charger
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was € 7,38
6,49
(excl. BTW)
7,85
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 6,49
Related Products
Compact main fuses for mounting with battery clamp ...
Description:
Compact main fuses for mounting with battery clamp on the battery pole. Compact fuselink suitable as main fuse for high current applicationsDirect mounting eliminates need for fuseholder & improves safetyOptional battery mounting clamp bracket (stock no. 342-0205) and insulating nut ...
Relay compatible with momentary voltage drops up to ...
Description:
Relay compatible with momentary voltage drops up to 50% of rated voltageHigh capacity and high dielectric strengthFlame-resistance UL94V-0 insulation materialChoice of connection types available - quick-connect or PCB terminalsSuitable DIN rail/surface socket (Front connecting socket) and relay mounting clip ...
For the targeted dissipation of heat to assembliesAir ...
Description:
For the targeted dissipation of heat to assembliesAir flow rate of up to 162 m3/h (with 3 fans) and 192 m3/h (with 6 fans)Protection against contact in accordance with EN 292, T1 and T2Mechanical retainer for power cableCan be adapted ...
The frequency divider FT is intended for the ...
Description:
The frequency divider FT is intended for the error-free division of frequencies or pulses from conventional encoders, sensors or other incremental measuring systems. Four readily accessible DIL switches allow programming division ratios from 1:1 up to 1:4096 and the desired ...