CTEK CT5 Start&Stop Lead Acid Battery Charger, with EU Plug

  • RS-stocknr. 901-5859
  • Fabrikantnummer CT5 Start&Stop
  • Fabrikant CTEK
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CN
Productomschrijving

CTEK CT5 START/STOP Battery Charger and Maintainer

The CTEK START/STOP Battery Charger & Maintainer has been specially designed to provide safe and easy charging and maintenance for vehicles equipped with the new generation START/STOP technology.
To ensure the vehicle's START/STOP function operates effectively to deliver maximum fuel efficiency and minimum environmental impact, the battery has to be properly charged and maintained. This also maximizes battery lifetime and gives optimal reliability - avoiding unexpected and costly replacements

Battery capacity: 14-130Ah
Insulation class: IP65
Specially designed for new generation Start/Stop vehicles
Supports fuel efficiency and emissions benefits of Start/Stop technology
Maximises battery lifetimes and reliability
Fully automatic, safe and easy to use - connect and forget

The CTEK START/STOP Battery Charger & Maintainer is a practical and simple to use charger with an easy to understand display. It is non-sparking, reverse polarity protected and short-circuit proof

All types of 12V lead-acid batteries (WET, MF, Ca/Ca and GEL). Optimized for AGM and EFB-batteries

Specificaties
Kenmerk Waarde
Number of Batteries Charged 1
Chemistries Charged Lead Acid
Plug Type EU
Batteries Included No
Model Number CT5 Start&Stop
Charge Current 3.8A
Input Voltage 220 240V ac
Number of Charge Stages 3
Output Voltage 12V
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
18 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
120,56
(excl. BTW)
145,88
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 120,56
Related Products
step charge control with current detectionUniversal input voltage ...
Description:
step charge control with current detectionUniversal input voltage (90-264 VAC)Wake up and low current start-up of deeply discharged batteriesWith NTC input on requestError indication for reverse polarity, short circuit, charging battery packswith wrong number of cells and safety timer run-out. ...
3-step charge control with current detectionUniversal input voltage ...
Description:
3-step charge control with current detectionUniversal input voltage (90-264 VAC)Wake up and low current start-up of deeply discharged batteriesError indication for reverse polarity, short circuit, charging of lower voltage batteries and safety timer run-out.
The 3 modes (constant current, timed constant voltage, ...
Description:
The 3 modes (constant current, timed constant voltage, continuous ’float’) optimise the charging process and permit the charger to be left connected indefinitely3-colour LED charge status indicatorInput: 190 to 264VReverse-polarity and short-circuit protectedLow leakage current - unit can be left ...
6 V, 12 V and 24 V lead–acid ...
Description:
6 V, 12 V and 24 V lead–acid battery chargers with cut-out.12 V versions are provided with several output current values.LED operating mode display.Protected against polarity reversal.Fitted with 2-hour timer (±30 min).Supplied with EU plugSupplied with 2 clip-on output connectors ...