SKF Speed Sleeve CR99393

  • RS-stocknr. 719-2232
  • Fabrikantnummer CR 99393
  • Fabrikant SKF
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

SPEEDI-SLEEVE

SKF SPEEDI-SLEEVES offer a cost-effective sealing solution when machine shaft surfaces have been damaged or worn in operation. SKF SPEEDI-SLEEVES eliminate the typical need to replace or rework damaged shafts caused by abrasion due to environmental contaminants, high pressures, speeds or inadequate lubrication.

Shafts can be up and running within minutes, at a fraction of the cost of traditional reworking. The standard SPEEDI-SLEEVES size range covers shaft diameters from 11.91 to 203.33mm (0.472 to 8 in)
Each SPEEDI-SLEEVE, metric or imperial, is designed to fit a specific shaft range, usually above and below the nominal shaft diameter. This permits some flexibility to accommodate variations in the actual shaft size
SPEEDI-SLEEVES are made of stainless steel and their extremely thin walls (0.28mm/.011 in.) allow users to retain the original seal size. All SPEEDI-SLEEVES feature a removable installation flange for easy mounting using a tool supplied with each sleeve
The flange can be retained or removed (if necessary) for clearance purposes - a pre-cut tear-groove is provided

Note

SPEEDI-SLEEVES cannot be re-used.

Shaft Repair

Specificaties
Kenmerk Waarde
Type Speed Sleeve
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
40,86
(excl. BTW)
49,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 40,86
5 - 9
€ 39,22
10 +
€ 38,42
Related Products
Eccentric and concentric types incorporate a compact deep ...
Description:
Eccentric and concentric types incorporate a compact deep groove hardened precision ground ball bearing. V-profile in outer race to accommodate the ring slide. Provided with metal shieldsLubricated for life.
Adapter Sleeves are the most commonly used components ...
Description:
Adapter Sleeves are the most commonly used components for locating bearings with a tapered bore onto a cylindrical seating, as they can be used on smooth or stepped shafts. Easy to mount and require no additional location on the shaftWhen ...
Designed to protect the machine operator from rotating ...
Description:
Designed to protect the machine operator from rotating shaft ends whilst providing protection to the bearing. Mild steel coated with enamelEasily removed by screwdriver leverage.
iglidur® J plain bearings may be used for ...
Description:
iglidur® J plain bearings may be used for long-life applications, and are also suitable for use with soft shafts. The iglidur® J plain bearings are designed to provide the lowest coefficient of friction while running dry, and offer a low ...