4 Hole Flange Bearing Unit, PME35-XL-N, 35mm ID
- RS-stocknr.:
- 137-1861
- Fabrikantnummer:
- PME35-XL-N
- Fabrikant:
- INA
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
3 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 71,78
(excl. BTW)
€ 86,85
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 4 | € 71,78 |
| 5 - 9 | € 68,91 |
| 10 - 24 | € 67,47 |
| 25 + | € 66,03 |
- RS-stocknr.:
- 137-1861
- Fabrikantnummer:
- PME35-XL-N
- Fabrikant:
- INA
Datasheets
Wetgeving en compliance
Productomschrijving
Flanged Housing Units with Centring Spigot
These flanged housing units have four bolts and a centring spigot which is mounted in a turned recess into the machine structure. The centring spigot gives concentric alignment of the housings and relieves the fixing screws of any radial forces.
Features and Benefits
• Cast iron
• Centring spigot
• Eccentric locking collar
• P seals
• Four-bolt units
Product Application Information
The units are used predominantly as locating bearings, but are also suitable as non-locating bearings under low loads and speeds.
Suffixes
N - Cast iron housing with undercut slot for end caps
INA
Specificaties
Kenmerk | Waarde |
|---|---|
| Inside Diameter | 35mm |
| Bearing Unit Type | Flange Bearing Unit |
| Number of Mount Holes | 4 |
| Material | Cast Iron |
| Width | 135mm |
| Depth | 39mm |
| Mount Hole Size | 11.5mm |