2 Hole Flanged Bearing, GFL-10, 10mm ID

  • RS-stocknr. 311-2768
  • Fabrikantnummer GFL-10
  • Fabrikant Igus
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

IGUS® Maintenance Free 2 Bolt Plain Bearing

These very low height plain bearings can be used with rotating, oscillating and axial movements. They are maintenance free and abrasion, temperature and corrosion resistant.

E10 tolerance on inside diameter (measured with plug gauge)
Fit into a H7 bore for high load applications
Can be used with a simple punched hole for most applications
Temperatures from -40°C to +220°C (short term), 130°C (long term) possible
Maintenance free, self lubricating
Ideal in dirty dusty conditions

Note

IGUBAL® bearings are designed to run with a clearance between the shaft and the inside diameter of the ball, to prevent the ball turning in the housing.

//media.rs-online.com/t_line/L311276-01.gif
//media.rs-online.com/t_line/LD311276-01.gif
//media.rs-online.com/t_line/LD311276-02.gif

Flange Units & Pedestal / Pillow Blocks

IGUBAL® pillow block bearings are self-lubricating and require no maintenance. Designed to run dry major advantages include the bearings are extremely tolerant to dirt and dust, meaning that IGUBAL® can be used in abrasive environments.

Low weight (20% of equivalent steel)
High rigidity
Maintenance free-dry running
Corrosion and chemically resistant
High fatigue strength under changing loads
Working temperature range: -30 to +80°C

Specificaties
Kenmerk Waarde
Material Iglide G300
Inside Diameter 10mm
Length 30mm
Width 15mm
Depth 6mm
Number of Mount Holes 2
Mount Hole Size 4.5 mm
Mount Hole Centre-to-Centre 22mm
34 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
24 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
3,86
(excl. BTW)
4,67
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 3,86
5 - 9
€ 3,75
10 +
€ 3,61
Related Products
INA from Schaeffler linear ball bearings KH and ...
Description:
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which ...
SKF thrust ball bearings are designed to hold ...
Description:
SKF thrust ball bearings are designed to hold axial loads produced during shaft rotation and must not be exposed to any radial loads. These bearings consist of two strong and ground thrust plates with matching ball grooves on one side ...
Angular Contact Bearings are ideally suited to applications ...
Description:
Angular Contact Bearings are ideally suited to applications requiring high rotating speeds, combined radial and axial loads and a high degree of stiffness and running accuracy. High Performance - They have a high load carrying capacity and thus allow smaller ...
IGUBAL® pillow block bearings are self-lubricating and require ...
Description:
IGUBAL® pillow block bearings are self-lubricating and require no maintenance. Designed to run dry major advantages include the bearings are extremely tolerant to dirt and dust, meaning that IGUBAL® can be used in abrasive environments. Spherical two bolt flange bearings ...