- RS-stocknr.:
- 750-8992
- Fabrikantnummer:
- UCP212
- Fabrikant:
- RS PRO
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
11 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 69,23
(excl. BTW)
€ 83,77
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 69,23 |
5 - 9 | € 67,84 |
10 + | € 66,46 |
- RS-stocknr.:
- 750-8992
- Fabrikantnummer:
- UCP212
- Fabrikant:
- RS PRO
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- CN
Productomschrijving
RS PRO Pillow Block Bearing 60 mm ID
If you need to support a rotating shaft, this pillow-block bearing from RS PRO is a reliable, low-maintenance solution. It's quick to install as it comes greased, and the mounting block has pre-drilled holes that make it easy to attach to your equipment.
The bearing is strong thanks to its cast-iron material, so you can count on it to withstand a range of low-loading conditions that don't require the exceptionally high strength of a plummer block. There's a seal around the bearing that prevents water and dirt from getting into your machinery and causing damage.
This part has been stringently tested by engineers for safety and reliability. A bearing like this one is frequently used in shipping yards, farms and manufacturing plants. It's suitable for applications such as packaging machinery, heat-treatment facilities and conveyor systems.
The bearing is strong thanks to its cast-iron material, so you can count on it to withstand a range of low-loading conditions that don't require the exceptionally high strength of a plummer block. There's a seal around the bearing that prevents water and dirt from getting into your machinery and causing damage.
This part has been stringently tested by engineers for safety and reliability. A bearing like this one is frequently used in shipping yards, farms and manufacturing plants. It's suitable for applications such as packaging machinery, heat-treatment facilities and conveyor systems.
Features and Benefits
- Pillow-block bearing unit type
- Centre height of 69.8 mm
- Depth of 65.1 mm
- Inside diameter of 60 mm
- Length of 241 mm
- Overall height of 138 mm
- Cast-iron material
- Mounting hole centre-to-centre of 184 mm
- Mounting hole size of 20 mm
Specificaties
Kenmerk | Waarde |
---|---|
Inside Diameter | 60mm |
Bearing Unit Type | Pillow Block |
Material | Cast Iron |
Centre Height | 69.8mm |
Mount Hole Size | 20mm |
Length | 241mm |
Depth | 65.1mm |
Overall Height | 138mm |
Mount Hole Centre-to-Centre | 184mm |