SKF 4 Hole Cylindrical, FYJ 20 TF 20 mm ID
- RS-stocknr.:
- 462-349
- Fabrikantnummer:
- FYJ 20 TF
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 42,85
(excl. BTW)
€ 51,85
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 13 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 42,85 |
*prijsindicatie
- RS-stocknr.:
- 462-349
- Fabrikantnummer:
- FYJ 20 TF
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Flange Bearing Unit | |
| Inside Diameter | 20 mm | |
| Number of Mount Holes | 4 | |
| Material | Cast Iron | |
| Width | 33.3 mm | |
| Mount Hole Size | 10 mm | |
| End Type | Sealed | |
| Mount Hole Centre-to-Centre | 64mm | |
| Bore Type | Cylindrical | |
| Series | FYJ 20 | |
| Standards/Approvals | No | |
| Limiting Speed | 8500rpm | |
| Static Load Rating | 6.55kN | |
| Dynamic Load Rating | 12.7kN | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Flange Bearing Unit | ||
Inside Diameter 20 mm | ||
Number of Mount Holes 4 | ||
Material Cast Iron | ||
Width 33.3 mm | ||
Mount Hole Size 10 mm | ||
End Type Sealed | ||
Mount Hole Centre-to-Centre 64mm | ||
Bore Type Cylindrical | ||
Series FYJ 20 | ||
Standards/Approvals No | ||
Limiting Speed 8500rpm | ||
Static Load Rating 6.55kN | ||
Dynamic Load Rating 12.7kN | ||
- Land van herkomst:
- IT
Akshay
The SKF Square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.
Resist high levels of contamination
Designed for high temperatures and speeds
Accommodate relatively heavy loads
Cost-effective
Gerelateerde Links
- SKF 4 Hole Cylindrical, FYJ 90 TF 90 mm ID
- SKF 4 Hole Cylindrical, FYJ 75 TF 75 mm ID
- SKF 4 Hole Cylindrical, FYJ 60 TF 60 mm ID
- SKF 4 Hole Cylindrical, FYJ 80 TF 80 mm ID
- SKF 4 Hole Cylindrical, FYJ 70 TF 70 mm ID
- SKF 4 Hole Cylindrical, FYJ 50 TF 50 mm ID
- SKF 4 Hole Cylindrical, FYJ 40 TF 40 mm ID
- SKF 4 Hole Cylindrical, FYJ 25 TF 25 mm ID