SKF 1 Hole Cylindrical, TU 20 TF 20 mm ID
- RS-stocknr.:
- 464-770
- Fabrikantnummer:
- TU 20 TF
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 53,06
(excl. BTW)
€ 64,20
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 12 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 53,06 |
*prijsindicatie
- RS-stocknr.:
- 464-770
- Fabrikantnummer:
- TU 20 TF
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Bearing Unit | |
| Inside Diameter | 20 mm | |
| Number of Mount Holes | 1 | |
| Material | Cast Iron | |
| Locking Type | Screw | |
| Length | 97mm | |
| Width | 34 mm | |
| Depth | 92mm | |
| Series | TU 20 TF | |
| Bore Type | Cylindrical | |
| Standards/Approvals | RoHS | |
| Limiting Speed | 8500rpm | |
| Static Load Rating | 6.55kN | |
| Dynamic Load Rating | 12.7kN | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Bearing Unit | ||
Inside Diameter 20 mm | ||
Number of Mount Holes 1 | ||
Material Cast Iron | ||
Locking Type Screw | ||
Length 97mm | ||
Width 34 mm | ||
Depth 92mm | ||
Series TU 20 TF | ||
Bore Type Cylindrical | ||
Standards/Approvals RoHS | ||
Limiting Speed 8500rpm | ||
Static Load Rating 6.55kN | ||
Dynamic Load Rating 12.7kN | ||
- Land van herkomst:
- IT
The SKF Take-up ball bearing units, consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a grey cast iron housing. Typically mounted in take-up frames, the unit has an inner ring extended on both sides and is locked by tightening a set screw on the inner ring, which makes it easy to mount.
Designed for an alternating rotation
Quick and easy to mount onto the shaft
Accommodate static initial misalignment
Long service life
Reduced noise and vibration levels