Keysight Technologies N1413A Interface, Accessory Type High Resistance Meter Fixture Adapter

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MY
Productomschrijving

Keysight N1413A High Resistance Meter Fixture Adapter

Keysight N1413A is an adapter to convert connections for high resistance meter accessories. It enables them to be controlled by Keysight electrometer B2985A ( 888-2370 ).

Accommodates three cables
Easy attachment
4-pin terminal plug for interlock connection
Manual switch for selecting floating or grounded DUT

Keysight Power Supplies

Specificaties
Kenmerk Waarde
Accessory Type High Resistance Meter Fixture Adapter
For Use With B2980A Series-B2985A, B2980A Series-B2987A
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
599,00
(excl. BTW)
724,79
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 599,00
Related Products
EA-IF-U1 USB INTERFACE. Can be retrofitted, simple to ...
Description:
EA-IF-U1 USB INTERFACE. Can be retrofitted, simple to install using plug and playSimple configuration via setup menu on the deviceGateway function with 2 cards (PSI 9000)Simple networking of different devicesMaster-slave mode supportShare-bus mode supportGalvanic isolation up to 2000 V.
This series of DC electronic loads provides fast ...
Description:
This series of DC electronic loads provides fast operation and accurate programming & readback for high-volume DC power supply test systems. The N3300A full-rack width mainframe (3.2kg) accepts user-installable Keysight load modules for easy system configuration and future reconfiguration. It ...
N6700 series 1U, 100-240V, 4-slot mainframe accepts 1-4 ...
Description:
N6700 series 1U, 100-240V, 4-slot mainframe accepts 1-4 DC power modules (ordered separately) in any combination. If the mainframe is to be mounted then it is necessary to order the N6709A Rack Mount Kit 690-9644 . If fewer than 4 ...
The Keithley 7712 3.5GHz 50 Ohm RF Module ...
Description:
The Keithley 7712 3.5GHz 50 Ohm RF Module is a plug-in module which offers a 50Ω, dual 1x4 multiplexer configuration with rear panel SMA 1x4 connectors. Multiple multiplexers can be cascaded to build scaleable matrix and multiplexer systems for devices ...