Aim-TTi Digital Bench Power Supply 94W, 1 Output 0 → 250V 0 → 375mA With RS Calibration

  • RS-stocknr. 706-8772
  • Fabrikantnummer PLH250
  • Fabrikant Aim-TTi
Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: GB
Productomschrijving

PLH & PLH-P Series

PLH is a development of the Aim-TTi PL series. The ultra compact form, high power density and smart analog controls of PL are incorporated in PLH, which also offers voltages up to 250V to cover applications beyond the capabilities of standard bench PSUs and into areas such as magnetics. PLH-P includes all the manual control features of PLH but offers also full remote control and read-back for bench and system applications using RS-232, USB and Ethernet (LAN/LXI).

Input power 280VA maximum
Low output noise and fast transient recovery
High power density - up to 94W from a quarter-rack, 3U sized casing
Unusually small bench footprint and, for rack-mount applications, up to 4 units can be mounted into a single slot
Exceptional line and load regulation, easy-switch remote sense
High accuracy 4-digit fixed-resolution meters, low current range, current meter averaging
Quick and intuitive adjustment of voltage and current
Unique S-Lock function digitally locks voltage and current settings at the touch of a button
Unique V-Span function enables the full 300° rotation of the voltage control to cover any voltage range
DC output switch enables voltage and current to be set up before connecting the load
Operating temperature range +5ºC → +40ºC, 20% → 80% RH
Storage temperature range -40ºC → +70ºC
Suitable for indoor use at altitudes up to 2000m, Pollution Degree 2
Intelligent variable-speed low-noise fan assists convection cooling

Standards

EN 61010-1, EN61326

Supplied with

User manual, mains lead and (PLH-P only) CD containing driver software

Specificaties
Kenmerk Waarde
Output Voltage 0 → 250V
Output Current 0 → 375mA
Number of Outputs 1
Type Digital
Power Rating 94W
Supply Voltage 115 V ac, 230 V ac
Number of Displays 2
Output Connector Binding Post Terminal
Calibrated RSCAL
Minimum Temperature +5°C
Maximum Temperature +40°C
11 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
527,00
(excl. BTW)
637,67
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 527,00
Related Products
Block BR351 Isolating transformer with controllable output voltage ...
Description:
Block BR351 Isolating transformer with controllable output voltage for use in the laboratory. Features include Rated input voltage 230 Vac. Output 0 Vac to 250 Vac, Insulation class E, Maximum ambient temperature 40°C,, Efficiency up to 93%, self-cooling. Limited short ...
This dual output power pack offers two fully ...
Description:
This dual output power pack offers two fully isolated units each having separate output terminals and an independent control for range selection5, 12, or 15Vdc. may be obtained on both outputs simultaneouslyFeatures short circuit protection and a current limitVisual indication ...
Small high density 2 U packageBuilt-in voltage and ...
Description:
Small high density 2 U packageBuilt-in voltage and current measurementFull protection from over-voltage and over-currentSupports the easy-to-use SCPI (Standard Commands for Programmable Instruments)Command compatibility for Sorensen DLM and Xantrex XFR DC SuppliesLAN, USB, and GPIB interfaces standardFully ...
The EA-PS 5000 160W - 640W (μ-processor) Series ...
Description:
The EA-PS 5000 160W - 640W (μ-processor) Series offers a high performance micro-controller and 16-bit resolution. Features include an 'auto-ranging' output for flexible usage at either high voltage or high current, as required, within the nominal power rating. The EA-PS ...