RS PRO Blower Gun Dust Bag Kit, 6bar

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Deep Hole Vacuum Gun

Special version designed for removing dust, debris and swarf from blind holes up to 18 inches deep
Plastic probe jets high pressure air into the hole to dislodge particles which are safely sucked away by the main nozzle
Main nozzle shrouded to prevent particles escaping and causing injury
1/4in BSP Inlet
Max working pressure 6 bar
Accessories available separately

Caution

These non-restricted type blow guns must only used on air lines which have a pressure regulator set at a maximum of 30 psi.

Warning

  • To avoid risk of injury, these guns must only be used with either the dust bag or conveying hose.
    Always use approved eye protection when using these tools. Blow guns, unless correctly used, can prove dangerous; read instructions carefully.
Specificaties
Kenmerk Waarde
Type Dust Bag Kit
Working Pressure 6bar
Air Inlet BSP 1/4in
34 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
74 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
17,92
(excl. BTW)
21,68
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 17,92
10 - 24
€ 17,21
25 +
€ 16,68
Related Products
The SMC VMG series of blow guns have ...
Description:
The SMC VMG series of blow guns have a large effective area without nozzle. Pressure loss is 0.725psi (0.005MPa) or less when a nozzle bore size of 2.5mm is used. Energy saving Shock resistant bodyGun body made from high impact, ...
RS Pro 1/4 in hex right-angle drill driver ...
Description:
RS Pro 1/4 in hex right-angle drill driver attachment. Accepts standard 1/4 inch hexshank hex bits, offers a 1 piece handle and can be use at various angles. • Durable impact rated• Compact design allows work in tight space• Accept ...
Designed for use with the Cordless Smoothcut range ...
Description:
Designed for use with the Cordless Smoothcut range of holesaws the Quick Change Connector allows the change of arbors without adjustment of the drill chuck. By placing the connector into the drill chuck and simply sliding back the collar of ...
The Starrett DB2 is a debris collector for ...
Description:
The Starrett DB2 is a debris collector for hole saws. It is designed to prevent debris clean-up and to protect the drill itself. DB2 prevents dust from entering the motor of the drill. It also means that you do not ...