- RS-stocknr.:
- 806-820
- Fabrikant:
- RS PRO
9 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
5 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 12,95
(excl. BTW)
€ 15,67
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 12,95 |
- RS-stocknr.:
- 806-820
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving
RS PRO Blow/Vacuum Gun Accessories
Air powered clean up guns that can be converted into a vacuum or blow gun by unscrewing the rear of the gun, reversing the venturi unit and screwing the gun back together
The venturi/vortex action multiplies input and prevents risk of stalling
Constructed from hard wearing maintenance nylon 6 that is also oil resistant and chemically inert
1/4in BSP Inlet
Max working pressure 6 bar
Accessories available separately, not supplied with dustbag
The venturi/vortex action multiplies input and prevents risk of stalling
Constructed from hard wearing maintenance nylon 6 that is also oil resistant and chemically inert
1/4in BSP Inlet
Max working pressure 6 bar
Accessories available separately, not supplied with dustbag
Accessories Available Separately
Caution
Non-restricted type blow guns must only be used on air lines which have a pressure regulator set at a maximum of 30 psi.
Warning
To avoid risk of injury, these guns must only be used with either a suitable dust bag or conveying hose.
Always use approved eye protection when using these tools. Blow guns, unless correctly used, can prove dangerous; read instructions carefully.
Always use approved eye protection when using these tools. Blow guns, unless correctly used, can prove dangerous; read instructions carefully.
Specificaties
Kenmerk | Waarde |
---|---|
Type | Conveyor Hose |
Working Pressure | 6bar |
Air Inlet BSP | 1/4in |